LG -600 User Manual page 16

the print head to prevent damage
□
Please note, to confirm the ribbon when you install the ribbon and label, packaging
and appearance of the label to avoid Ribbon and soiled with dust, debris, resulting in
damage to the print First Class parts
□
Install ribbon distinguish ribbon toner coating the inner surface of the outer surface
of the inner surface of the icon is loaded according to the inner carbon, contrary to
press the outer carbon icon load. Mistakenly installed will not be able to print
normally to remain precisely the same label content
□
After the installation of the label to be rotating the corresponding yellow knob, adjust
the label limit blank center and try to be an effective label edges to prevent the label
printing process deviates from the print position
□
Die cutting translucent yellow arrow marks the location of the sensors in the sensor
module housings, black mark sensor in the left side of the component from the
yellow arrow 10mm white arrow indicates location of the yellow knob clockwise
rotating the corresponding move to the right, otherwise move to the left
□
According to the label size and type currently in use (die-cut or black mark) the right
。
。
。
。
。