Table of Contents
Advertisement
Steps
Removing the POM (panel mounting)
Remove the four screws that secure the module to the rear panel. See Panel mounting
(Page 48)
Assembly, connection and commissioning
1. Follow the instructions in this section: "Installing the Power Output Module (POM)
(Page 44)"
2. Follow the instructions in this section: "Wiring (Page 53)"
3. Follow the instructions in this section: "Commissioning (Page 81)"
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
1
From the front, insert a screwdriver in the opening in the busbar adapter
top of the busbar adapter must snap upwards.
2
Remove the busbar adapter by first pushing it upwards
Servicing and maintenance
12.5 Replacing the Power Output Module (POM)
②
, and then pulling it forwards
①
. The button on
③
.
159
Advertisement
Table of Contents
