Sony IXS-6700-C Installation Manual page 48

D8202 (A-7) : DEBUG Ethernet LINK
Lights when a link is established via CN8201 (DEBUG
Ethernet).
D8203 (A-7) : DEBUG Ethernet ACT
Lights when transmission or reception is in progress via
CN8201 (DEBUG Ethernet).
D8301 (A-6) : Internal Ethernet speed 10 Mbps/100
Mbps
Indicates whether the communication speed of Ethernet for
unit internal communication is 10 Mbps or 100 Mbps.
Turns off : 10 Mbps
Lights : 100 Mbps
D8302 (A-6) : Internal Ethernet ACT
Lights when transmission or reception is in progress via
Ethernet for unit internal communication.
D8303 (A-6) : Internal Ethernet LINK
Lights when a link is established via Ethernet for unit
internal communication.
ND1 (A-5) : Status LED
Status indication of CPU-DK3 on the MX-112 board.
<Switch>
S1 (A-7) : MAIN / BACKUP area toggle switch
Switch that determines whether to start up the flash
memory's MAIN area first or the BACKUP area first.
When the MAIN area is accidentally erased, if a backup
software is stored in the BACKUP area, the backup
software can be launched by toggling the switch to BACK-
UP and restarting IXS-6700/IXS-6600.
S7401 (A-9) : Status setting DIP switch
DIP switch for the status setting for CPU-DK3 on the MX-
112 board
S7402 (A-4) : Status setting rotary switch
Rotary switch for the status setting for CPU-DK3 on the
MX-112 board
S8001 (A-6) : CPU-DK3 reset switch
Pressing this switch resets CPU-DK3 on the MX-112
board.
S8101 (A-6) : CPU-DK3 MONITOR reset switch
Reset switch when performing maintenance at the termi-
nal.
1-40
IXS-6600/6700