19) Disconnect brake booster vacuum hose from
pipe.
20) Disconnect coupler of lead wire (black)
from distributor gear case.
21) Remove 4 bolts fastening gear shift lever
boot No. 2 and move the boot upward.
Fig. 3-3-4
22) Move gear shift lever boot No. 1 to upper
side of shift lever.
23) Loosen 3 bolts tightening gear shift lever
case cover and take shift lever out of lever
case.
Fig. 3-3-5
24) Raise vehicle.
25) Sever exhaust manifold from muffler by
undoing joint.
26) Disconnect clutch cable from engine mount-
ing bracket and clutch release lever.
27) Loosen drain plug to drain transmission
oil.
28) Remove propeller shaft interconnecting
transmission case and transfer case.
29) By using a chain block, hold engine so
that the engine is kept from falling.
NOTE:
engine at two hooks provided, one on inlet-
manifold side and the other on exhaust-mani-
fold side.
30) Remove exhaust center pipe mounting
bracket and 4 transmission mounting bolts.
Fig. 3-3-6
31) Remove the pipe connected to chassis
under the transmission case.
Fig. 3-3-7
3-7