Table of Contents
Advertisement
DEFAULT Screen
15) Turning ON or OFF the processing buzzer when a button is operated or the error buzzer
* If an error is detected during button operation, the error message "Error in operation" is displayed
at the bottom of the screen regardless of whether the error buzzer is turned ON or OFF.
Step 1)
Press the ↑ or ↓ button to display the words OP BUZZER (OFF(0)/ON(1)) in reverse video.
The same effect is obtained by left-clicking the words.
Step 2)
Enter 0 for buzzer OFF (disabled) and 1 for buzzer ON (enabled).
> 0 or 1 ↵ ↵
Example)
> 1 ↵ ↵
16) Setting the function display switching mode
When this mode is enabled
When this mode is disabled : F1 to F10 switches to F11 to F20 only while the F12 (SHIFT) button is
Step 1)
Press the ↑ or ↓ button to display the words F-Shift KEEP (OFF(0)/ON(1)) in reverse video.
The same effect is obtained by left-clicking the character string.
Step 2)
Enter 0 to disable this mode and 1 to enable this mode.
> 0 or 1 ↵ ↵
Example)
> 1 ↵ ↵
Switch buzzer ON.
: Each time the F12 (SHIFT) button on the keyboard is pressed, F1 to
F10 switches to F11 to F20 and back again.
held down.
Enable this mode.
33-6
Advertisement
Table of Contents
