Power Supply Connection; Fuses; External Functional Earth/Ground Terminal - GE ADTS552F User Manual

R G P
ETURNED OODS ROCEDURE

Power Supply Connection

The unit must be connected to the correct electrical power supply as stated, adjacent to the
power connector.
A qualified technician (see page i) must carry out the following procedure.
A power isolation device must be accessible at all times. This device can be considered as
disconnecting the ADTS power cable or building wall isolation switch. The ADTS front panel
switch is not classed as a power isolator.
CAUTION
THE SUPPLY MUST PROVIDE CONNECTION TO A PROTECTIVE GROUND TERMINAL. THE UNIT
MUST, AT ALL TIMES, BE CONNECTED TO THE SUPPLY EARTH (GROUND).
THE POWER SUPPLY CABLE AND CONNECTOR MUST BE CORRECTLY RATED FOR THE POWER
SUPPLY.
European Colour
Brown
Blue
Green/Yellow

Fuses

The two fuses, located in the holders and mounted on the front panel, protect the unit. The fuses
are connected in the live and neutral supply circuit and are rated at:
- T5AH 250V 20mm

External functional earth/ground terminal

An external earth/ground connection stud is available as functional earth on the front panel
providing a connection point for other equipment to be connected to the same earth/ground
connection as the test set (This is not a protective earth/ground connection).
[EN] English
US Color
Black
White
Green
26
Function
Live
Neutral
Protective Earth (Ground)
K0553 Revision D