GE MDS 4790 Series Installation & Operation Manual page 74

66
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
Table 15. Front Panel Screens—Configuration Parameters
FRONT PANEL
SCREEN COMMAND
Menu Directory
Details, page 68
Modem MODEM
Details, page 69 [NONE/4800/9600/19200/
DEFAULT]
Details, page 48
Output Power Setting PWR [20–37]
[37-20] Details, page 51
Details, page 69
Push-to-Talk Delay PTT [0-255]
Details, page 70 Details, page 50
Radio Selection RADIO [AUTO/A/B]
Details, page 78 Details, page 51
Receive Frequency RX [xxx]
Details, page 69 Details, page 52
Receive Level [–20 to +3] RXLEVEL [–20 to +3]
Details, page 75 Details, page 53
Receive Pad RXPAD [ON/OFF]
Details, page 75 Details, page 53
Repeater Mode REPEATER [ON/OFF]
Details, page 71 Details, page 51
RX Mute Mode RXMUTE [ON/OFF/Time
Details, page 72 in msec]Details page 53
RX Timeout [NONE, RXTOT [NONE, 1-1440]
1-1440] Details page 53
Details, page 71
Set Date DATE [mmm dd yyyy]
Details, page 77 Details, page 44
Set Time TIME [hh:mm:ss]
Details, page 77 Details, page 57
Standby Equipment STANDBY [ON/OFF]
Details, page 73 Details, page 56
Transmit Timeout SCD [0-255]
Details, page 71 Details, page 54
Transmit Frequency TX [xxxx]
Details, page 68 Details, page 58
Transmit Gain TXGAIN [ON/OFF]
Details, page 75 Details, page 59
Transmit Level [–20 TXLEVEL [–20 to +3,
to +3, AUTO] AUTO]
Details, page 74 Details, page 59
Transmit Timeout TOT [ON/OFF,
Details, page 71 1-255]
Details page 58
Transmit Timeout Dura- TOT [ON/OFF, 1-255]
tion Details page 58
Details, page 71
MDS 4790/9790 Series I/O Guide
TERMINAL
DESCRIPTION
Select diagnostic, configuration, or event log
screens.
Set or show internal modem speed.
Set or show the transmit power output.
Set or show the amount of time to wait after
the host computer asserts RTS before keying
the radio and transmitting.
Set or show the active transceiver board;
enable or disable automatic switch-over.
Set or show the receive frequency.
Set or show the radio's audio transmit level
when the radio operates in analog mode.
Enable or disable the receive attenuator for
the receive audio level.
Enable or disable repeater mode.
When on, prevents the radio from hearing its
own transmissions. Prevents errors in some
software applications.
Set or show the amount of time to wait without
data receipt before generating an alarm and
switching to the stand-by transceiver board.
Set or show the date.
Set or show the time.
Enable or disable the monitoring of standby
equipment within the chassis.
Set or show amount of time to wait after a
de-key request before actually de-keying the
radio.
Set or show the transmitter frequency.
Enable or disable the transmit audio boost for
the transmit audio level.
Set or show the radio's audio transmit level
when the radio is in analog mode.
Enable or disable the Transmit Timeout timer
(time to wait before disabling the transmitter
to prevent unnecessary use of the frequency).
Set or show the Transmit Timeout duration
(time to wait before disabling the transmitter
to prevent unnecessary use of the frequency).
MDS 05-3438A01, Rev. F