Programming And Control Buttons; Navigating Through The Front Panel Screens - GE MDS 4790 Series Installation & Operation Manual

62
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx

Programming and Control Buttons

The programming and control buttons are located at the right side of the
front panel. Use these butons to navigate through the front panel screens
and, when the front panel display is in configuration mode, to make
changes to radio operating parameters.
of these controls.
ESCAPE
Figure 30. Programming and Control Buttons
• —When the start-up screen is shown, pressing this but-
ENTER
ton displays the Menu Directory screen. Otherwise, the
button has no effect in safe mode. Its use in radio configuration
is described in "Use of Control Buttons in Configuration Mode"
on Page 63.
• —Shows the previous screen in the menu hierarchy
ESCAPE
(start-up screen or menu directory). Its use in radio configura-
tion is described in
Mode" on Page
• Up/down arrow buttons (
pressing the up or down arrow button shows the menu directory.
On the menu directory screen
arrow buttons cycle a selection arrow (->) through the main
menu items. On the individual menu screens, in safe mode,
pressing the up or down arrow buttons shows the menu direc-
tory.
• Left/right arrow buttons (
buttons cycle the display through the selected menu's screens.

Navigating Through the Front Panel Screens

Figure 29 on Page 61 shows the menu hierarchy, as well as the button
presses used to display the start-up and menu directory screens (navigate
between individual screens with the right or left arrow buttons).
MDS 4790/9790 Series I/O Guide
Figure 30
Invisible place holder
ENTER
"Use of Control Buttons in Configuration
63.
)—On the start-up screen,
(Figure 31), the up and down
)—The left and right arrow
MDS 05-3438A01, Rev. F
shows a detailed view
ENTER