Cooling Fan Run-On; Proximity Sensor (Movement Sensor) - Miele 11 196 580 Operating And Installation Instructions

Cooling fan run-on

The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven compartment, on the fascia
panel or on the oven housing unit.
– Temperature controlled
The cooling fan switches off when
the temperature in the oven drops
below 70 °C.
– Time controlled
The cooling fan switches off after a
period of about 25 minutes.
Condensate can damage the oven
housing unit and the worktop and
lead to corrosion in the oven.
If you have set the cooling fan
to Time controlled
the oven compartment to keep
warm, moisture levels in the oven will
increase, leading to condensation
forming on the fascia panel and
surrounding kitchen furniture, and
drops of moisture collecting under
the worktop.
Do not leave food in the oven
compartment to keep it warm if you
have selected Time controlled
and leave food in
.
Proximity sensor (movement
sensor)
The movement sensor detects when
you approach the touch display, e.g.
with your hand or body.
If you want the movement sensor to
respond even when the oven is
switched off, select the
QuickTouch | On setting.
Switch light on
– during cooking process
As soon as you approach the touch
display during a cooking programme,
the oven interior lighting switches on.
The oven interior lighting
automatically switches off again after
15 seconds.
– Always on
As soon as you approach the touch
display, the oven interior lighting
switches on. The oven interior
lighting automatically switches off
again after 15 seconds.
– Off
The movement sensor does not
respond when you approach the
touch display. Select the  sensor
control to switch on the oven interior
lighting for 15 seconds.
Settings
|
Display
45