Siemens SINAMICS G110M Function Manual page 95

Link Object, Instance Number: F6 hex
Supported services
Class
• Get Attribute all
• Get Attribute single
Table 4- 23
No.
1
2
3
Table 4- 24
No.
1
2
3
4
5
Fieldbuses
Function Manual, 01/2016, FW V4.7 SP6, A5E34229197B AC
Class Attribute
Service Type Name
get UINT16 Revision
get UINT16 Max Instance
get UINT16 Num of Instances
Instance Attribute
Service Type Name
get UINT32 Interface Speed
get Interface Flags
get ARRAY Physical Address
get, set Struct of Interface Counters
UINT32 In Octets
UINT32 In Ucast Packets
UINT32 In NUcast Packets
UINT32 In Discards
UINT32 In Errors
UINT32 In Unknown Protos
UINT32 Out Octets
UINT32 Out Ucast Packets
UINT32 Out NUcast packets
UINT32 Out Discards
UINT32 Out Errors
get, set Struct of Media Counters
UINT32 Alignment Errors
UINT32 FCS Errors
Communication via EtherNet/IP
Instance
• Get Attribute all
• Get Attribute single
• Set Attribute single
Value/explanation
0: link down,
10: 10 Mbps,
100: 100 Mbps
Bit 1: Link-Status
Bit 2: Duplex Mode (0: halb duplex, 1 duplex
Bit 3 ... 5: Automatic state identification
Bit 6: Reset required
Bit 7: Local hardware fault (0 = ok)
r8935 Ethernet MAC address
Optional, required if the "Media Counters Attribu-
te" is implemented.
Received octets
Received Unicast packets
Received non-Unicast packets
Incoming packets, not processed
Incoming packets with errors
Incoming packets with unknown protocol
Sent octets
Sent Unicast packets
Sent non-Unicast packets
Outgoing packets, not processed
Outgoing packets, with errors
Media-specific counters
Structure received, which does not match the
number of octets
Structure received, which does not pass the FCS
check
4.5 Supported objects
95