Order Information; Other Accessories - GE 489 Instruction Manual

1 INTRODUCTION
All features of the 489 are standard, there are no options. The phase CT secondaries must be specified at the time of order.
The control power and analog output range must also be specified at the time of order. There are two ground CT inputs:
one for the GE Power Management HGF core balance CT and one for a ground CT with a 1 A secondary (may also be
used to accommodate 5 A secondary). The VT inputs accommodate VTs in either a delta or wye configuration. The output
relays are always non-failsafe with the exception of the service relay. The 489PC software is provided with each unit. A
metal demo case may be ordered for demonstration or testing purposes.
489
489
Additional 489 accessories are listed below.
• 489PC software:
• DEMO:
• SR 19-1 PANEL:
• SR 19-2 PANEL:
• SCI MODULE:
• Phase CT:
• HGF3, HGF5, HGF8:
• 489 1 3/8" Collar:
• 489 3" Collar:
GE Power Management
* * *
Basic unit
P1 Current Transformer Inputs: 1 A CT Secondaries
P5 Current Transformer Inputs: 5 A CT Secondaries
LO DC: 25-60 V; AC: 20-48 V @ 48-62 Hz
HI DC: 90-300 V; AC: 70-265 V @ 48-62 Hz
A1 0-1 mA analog outputs
A20 4-20 mA analog outputs
Figure 1–2: 489 ORDER CODES
Shipped free with 489
Metal carry case in which 489 unit may be mounted
Single cutout for 19" panel
Double cutout for 19" panel
RS232 to RS485 converter box, designed for harsh industrial environments
50, 75, 100, 150, 200, 250, 300, 350, 400, 500, 600, 750, 1000 phase CT primaries
For sensitive ground detection on high resistance grounded systems
For shallow switchgear, reduces the depth of the relay by 1 3/8"
For shallow switchgear, reduces the depth of the relay by 3"
489 Generator Management Relay
1.1 OVERVIEW

1.1.2 ORDER INFORMATION

1.1.3 OTHER ACCESSORIES

1-3
1