Suzuki SQ416 Service Manual page 48

1. Fuel feed hose
2. Fuel return hose
16) Disconnect following hoses at the location shown in figure:
D Fuel feed hose from fuel feed pipe
D Fuel return hose from fuel return pipe
17) Remove EVAP canister.
FRONT
18) Remove P/S pump ass'y. Refer to Section 3B1 for details.
19) Remove A/C compressor ass'y. Refer to Section 1B for details.
20) Remove steering shaft lower assembly. Refer to Section
3C/3C1 for details.
21) Raise vehicle.
22) Remove front differential housing with differential from chassis
if equipped. Refer to Section 7E for removal.
23) Remove exhaust No.1 pipe. Refer to item "EXHAUST MAN-
IFOLD" in this section for removal.
24) Remove exhaust manifold stiffener from transmission.
25) Remove A/T fluid hose clamps from engine mounting bracket.
(for A/T vehicle)
26) Remove clutch housing lower plate.
27) Remove torque converter bolts (for A/T vehicle).
28) Remove starter motor.
29) Lower vehicle.
30) Support transmission. For A/T vehicle, don't jack under A/T oil
pan to support transmission.
31) Remove bolts and nuts fastening cylinder block and transmis-
sion.
ENGINE MECHANICAL (H25 ENGINE) 6A2-3