Table of Contents
Advertisement
WIT-300H User Manual
Issue: 0.4C
① If a user dials a busy station, CALL WAIT alerts call waiting to a busy station.
② After receiving intercom busy tone, press
③ When a busy terminal engaged an ICM or CO call is called through camp-on by a new caller.
④ The called station will hear camp-on tone. Then the called party can answers to a new call by
pressing [ Send ](
⑤ Press [ Send ](
⑥ MESSAGE come from IPECS is displayed on the LCD.
⑦ Press [ Send ](
NOTE : Pressing End button to release the active call (CO call or intercom call)
5.3.7
Call Park
Description
A user can park using CO line to CO line parking location.
Operation
Call Park
While connected to an outside call;
Press [ Trans/PGM ] + Dial a parking location. + Press [ Send ](
① The CO line being used is on hold and the WIP-Phone goes to an idle state.
Retrieving a parked call
Dial a parking location + Press [ Send ](
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
*
).
) to connect to the other calling station. The former calling party is on hold.
) to back to the former calling party .
)
or the last digit of the called station number.
)
27
Date: 24/May/2005
Advertisement
Table of Contents
