Miele DA 2360 Operating And Installation Instructions
Extractor unit
Hide thumbs
Also See for DA 2360:
- Operating and installation instructions (40 pages) ,
- Operating and installation instructions (36 pages) ,
- Operating and installation instructions (36 pages)
Related Manuals for Miele DA 2360
Summary of Contents for Miele DA 2360
- Page 1 Operating and Installation Instructions Ventilation System To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 775 160...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS .............. 3 Caring for the environment ................ 12 Description of functions .................. 13 Guide to the appliance .................. 14 Operation...................... 16 Turning on the blower.................... 16 Selecting the power level ..................16 Delayed shut-off ....................16 Turning off the blower.................... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. -
Page 4: Technical Safety
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment. - Page 5 Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operation faults. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.
-
Page 6: Proper Use
IMPORTANT SAFETY INSTRUCTIONS If the power cord is damaged, it must only be replaced by a qualified service technician. During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only completely isolated from the electricity supply if one of the following applies: –... - Page 7 IMPORTANT SAFETY INSTRUCTIONS – a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. –...
- Page 8 IMPORTANT SAFETY INSTRUCTIONS Fat and debris deposits impair the proper functioning of the ventilation hood. To ensure that cooking vapors are properly cleaned, never use the ventilation hood without the grease filters in place. There is a risk of fire if cleaning is not completed according to the instructions in this manual.
- Page 9 IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: – a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Page 10 Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Exhaust air should not be vented into a chimney or vent flue which is otherwise in use and should not be channeled into ducting which ventilates rooms with fuel-burning installations.
- Page 11 Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty will become void.
-
Page 12: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 13: Description Of Functions
Description of functions The following functions are available on Recirculation mode your ventilation hood, depending on the model: Recirculation mode hoods require a recirculation kit and OdorFree Charcoal Vented mode Filters (available as optional accessories), see "Technical Data" for more information. The air is drawn in and cleaned by the grease filters and directed outside. -
Page 14: Guide To The Appliance
Guide to the appliance... -
Page 15: Guide To The Appliance
Overhead lighting c OdorFree charcoal filters (2 filters) Optional accessories for recirculation mode d Grease filters (DA 2360: 1 filter; DA 2390: 2 filters) e Controls f On/Off button for the blower g Buttons for setting the blower power... -
Page 16: Operation
Operation Turning on the blower Turning the overhead lighting on/off Press the On/Off button . The overhead lighting can be turned on The blower turns on at level 2. The and off separately from the fan. symbol and 2 will light up in the blower level display. -
Page 17: Power Management
Operation Turning power management on/off Power management You can deactivate power The ventilation hood features a power management. management system to help save Keep in mind that this may increase energy. The blower power level is energy consumption. reduced and the lighting is turned off automatically. -
Page 18: Safety Shut-Off
Operation Safety shut-off If power management has been deactivated, the ventilation system will switch itself off automatically after 12 hours if it has been left on (blower and overhead lighting). Pressing the On/Off button for the blower or lighting will switch the ventilation system back on again. -
Page 19: Energy-Saving Tips
Energy-saving tips This hood operates in a very efficient and energy-saving manner. The following will help you to save even more energy when using it: – Ensure that there is sufficient ventilation in the kitchen when cooking. If there is insufficient air flow during vented mode, the hood cannot operate efficiently, causing increased operating noise levels. -
Page 20: Cleaning And Care
Stainless steel surfaces can also be cleaned using a non-abrasive Before cleaning or servicing the stainless steel cleaner, available from hood, disconnect it from the power Miele. supply, see "IMPORTANT SAFETY INSTRUCTIONS". To prevent the surfaces from quickly becoming dirty again, we recommend... -
Page 21: Grease Filters
Use a common dishwashing detergent. Select a program with a wash temperature between 120°F (50°C) and 150°F (65°C). In a Miele dishwasher use the "Normal" program. Depending on the detergent used, cleaning the filters in a dishwasher may cause the inside filter surfaces to become discolored. - Page 22 Cleaning and care When removing the filters for cleaning, also clean off any accessible oil or fat buildup from the housing. Doing so will prevent a fire hazard. Reinstall the grease filters. When inserting the filters, make sure that the locking clip is facing down.
-
Page 23: Odorfree Charcoal Filter
They are fitted in the canopy above the grease filters. Charcoal filters are available to order via the Miele Web Store, the Miele Spare Parts Department (see end of this booklet for contact details) or from your Miele dealer. -
Page 24: Changing A Light Bulb
(see "IMPORTANT Bulb type ......LED, GU10 SAFETY INSTRUCTIONS"). Power ..........3W Light bulbs are available from Miele or specialist dealers. Insert the lever supplied into the gap between the bulb and the bulb holder.. -
Page 25: Installation
Installation Information is subject to change. Please Before installation refer to our website to obtain the most Before installing the appliance, current product specification, technical read all of the information contained & warranty information. in this chapter and also in the The ventilation hood is intended for "IMPORTANT SAFETY installation in wall cabinets, ventilation... -
Page 26: Installation Parts
Installation Installation parts... - Page 27 Installation a 1 collar for exhaust ducting Keep the following in a safe place: 6" (150 mm). b 1 reducing collar for exhaust ducting 5" (125 mm). c Conversion kit for recirculation mode (not supplied, available as an Installation plan optional accessory; see "Technical data").
-
Page 28: Appliance Dimensions
Installation Appliance dimensions The drawing is not to scale. -
Page 29: Distance Between Cooktop And Ventilation Hood (S)
Alternatively, the ventilation hood can be secured to four fixing points on an interim shelf. d There are additional fixing points on the installation surface. e Cutout dimensions with Miele DAA 6 adapter for installation in, e.g., a cabinet measuring 30" (762 mm) in width. Distance between cooktop and ventilation hood (S) Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood. - Page 30 Installation Minimum distance S Cooking appliance Miele Non-Miele appliance appliance Electric Cooktops 24" (610 mm) Electric Barbeques and Fryers 26" (660 mm) Multiburner Gas Cooktops 26" (660 mm) 30" (760 mm) ≤ 43,000 BTU/hr (12.6 kW), no burner > 15,000 BTU/hr (4.5 kW).
-
Page 31: Installation Recommendations
Installation Installation recommendations – Please note that the greater the distance from the cooktop, the less effective the hood is at drawing in the cooking vapors. – To achieve optimum vapor extraction, the ventilation system must be centered over the cooktop, not to the side or behind. -
Page 32: Uneven Installation Surfaces
Installation Uneven installation surfaces If the installation surface is uneven making flush installation difficult, the frame can be realigned. Fit the ventilation system as described on the installation plan. Fit one of the screws supplied into Disconnect the ventilation system each bulb holder. -
Page 33: Air Venting
Air venting – Make sure that all connections are WARNING: Danger of toxic fumes. secure and airtight. Gas cooking appliances release carbon monoxide that can be Remember that any constriction of harmful or fatal if inhaled. the airflow will reduce extraction To reduce the risk of fire and to performance and increase operating properly exhaust air, the exhaust... -
Page 34: Reducing Collar
Air venting Reducing Collar (optional accessory) If you would like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 400 CFM. Check local building codes for max. -
Page 35: Electrical Connection
CSA C22.1-12, please consult a licensed electrician Canadian Electrical Code, Part I. or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED... -
Page 36: Service And Warranty
Miele This service is available in USA only. dealer or Miele Technical Service. The telephone number for Miele is listed MieleCare, our Extended Service at the back of these instructions. Contract program, gives you the... -
Page 37: Technical Data
Technical data Blower motor 350 W Overhead lighting DA 2360 2 x 3 W DA 2390 4 x 3 W Total connected load DA 2360 356 W DA 2390 362 W Supply voltage, frequency 120 V AC, 60 Hz Fuse 15 A Power cord length 2.5 ft (0.75 m) Weight DA 2360 24.2 lbs (11 kg) DA 2390 28.6 lbs (13 kg) - Page 39 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
- Page 40 DA 2360 DA 2390 en-US M.-Nr. 10 775 160 / 01...