Figure 9. Pairing the right controller
10
You are now ready to use the Dell Visor VR118 and enjoy the Windows Mixed Reality experience!
Alternative Visor Controller Pairing Method:
1
Go to Windows Settings -> Devices -> Bluetooth -> Bluetooth & other devices tab.
2
Remove earlier paired controllers.
3
Press and hold the Windows button for 2 seconds to turn on your controllers.
4
Remove the battery compartment cover and press and hold the Bluetooth pairing button until the LED constellation lights flash.
5
Identify Visor Controllers Left & Right from the List of devices.
6
Then
pair the controllers.
7
Both controllers should be connected now.
•
Verify your controllers work properly:
a
Launch Mixed Reality Portal and enter the Cliff House.
b
Move your controllers and verify tracking, test buttons, and verify
teleportation
works.
Setting up the Windows Mixed Reality experience
17