Tenant Service - Panasonic KX-NCP500 Features Manual

2.2.3 Tenant Service

2.2.3 Tenant Service
Description
This PBX can be shared with a certain number of tenants.
1.
Tenant Configuration
Tenant Member
The tenant members consist of extension user groups. One extension user group can belong to only one
tenant. Therefore, one extension can belong to only one tenant.
(® 2.2.2 Group)
Time Service
Each tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/night) can
be set for each day of the week. The Time Table numbers correspond to the tenant numbers respectively.
(® 2.2.4 Time Service)
[Example]
Tenant 1
Extension
User Group 1
Extension
User Group 2
Extension
User Group 3
Extension
User Group 4
Use Time Table 1
2.
System Management
Each of the following system management items can be assigned to each tenant.
a.
Tenant Operator (extension number/floating extension number of incoming call distribution group/
none) (® 2.2.5 Operator Features)
® 8.6 [6-6] Tenant—
b.
ARS Mode (Off/Local Access/All Access/System) (® 1.10.1 Automatic Route Selection (ARS))
® 8.6 [6-6] Tenant—
c.
Music Source for Music on Hold (System/BGM Number/Tone)
(® 1.13.4 Music on Hold)
® 8.6 [6-6] Tenant—
d.
System Speed Dialling (System/Tenant Exclusive)
(® 1.6.1.5 Speed Dialling—Personal/System)
® 8.6 [6-6] Tenant—
e.
PBX Extension Dialling Directory (All/Tenant)
(® 1.6.1.5 Speed Dialling—Personal/System)
® 8.6 [6-6] Tenant—
[Programming Example]
Tenant
Operator
No.
1 Extn.101
2 None
426 Feature Guide
Tenant 2
Extension
User Group 5
Extension
User Group 6
Use Time Table 2
Operator (Extension Number)
ARS Mode
Music On Hold
System Speed Dial
Extension Directory
ARS Mode
Local Access
System
*1 *2
System Speed
Music Source
System
*3
Tone
Tenant Exclusive
Extension
Dialling Directory
System All Tenant
*4
Extended/
Each Tenant