Panasonic KX-NCP500 Features Manual page 360

Hide thumbs Also See for KX-NCP500:

Table of Contents

1.30.1 TIE Line Service

To Receive a TIE Line Call

Extension Number Method (Access without PBX Code)

Dials "3011".

When a TIE line call is sent from one PBX to another, the receiving PBX first modifies the received

number according to the assignment for the trunk port: the number of digits removed, and the number

added, are determined by this assignment. Then the PBX checks whether the completed number is

an existing extension number at that PBX.

Feature Guide

TIE Line Network

A TIE line call is sent to

PBX-2 from PBX-1. If the

number sent from PBX-1

is an extension number of

PBX-2 (e.g., 2011), the

call will be received at

extension "2011". If not,

PBX-2 checks the

number in the TIE Line

Routing and Modified

Table of PBX-2.

If the match is found in

the table, the call will be

modified according to the

table and send to the

corresponding PBX

The number sent from

PBX-2 "3011" is an

extension number of

PBX-3. The call is

received at extension

Show Quick Links

Table of Contents