Reactivation of all monitoring types
When the "Reactivation of all monitoring types" function is configured, all the monitoring types
set in the NC for a tool are reset during reactivation.
References
SINUMERIK Operate Commissioning Manual
Multiple load points
If you have configured several loading points for a magazine, then the "Loading Point
Selection" window appears after pressing the "Load" softkey.
Select the required load point and confirm with the "OK" softkey.
13.7
Tool data OEM
You have the option of configuring the list according to your requirements.
Refer to the following document for more information on configuring OEM tool data:
SINUMERIK Operate Commissioning Manual
Procedure
13.8
Magazine
Tools are displayed with their magazine-related data in the magazine list. Here, you can take
specific actions relating to the magazines and the magazine locations.
Individual magazine locations can be location-coded or disabled for existing tools.
Milling
Operating Manual, 05/2017, A5E40868956
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "OEM tool" softkey.
Tool management
13.8 Magazine
655