Siemens SINUMERIK 840D sl Operating Manual page 467

G code program parameters
PL Machining plane
SC Safety clearance
F Feedrate
Milling
Operating Manual, 05/2017, A5E40868956
3. Press the "Groove" softkey.
The "Groove" input window opens.
4. Select one of the three groove cycles with the softkey:
Simple groove cycle
The "Groove 1" input window opens.
- OR -
Groove cycle with inclines, radii, or chamfers.
The "Groove 2" input window opens.
- OR -
Groove cycle on an incline with inclines, radii or chamfers.
The "Groove 3" input window opens.
ShopMill program parameters
T
mm D
* F
S / V
Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Cutting edge number
Feedrate
Spindle speed or constant cutting rate
mm/min
mm/rev
rpm
m/min
467