Siemens sinumerik 840D sl Operating Manual page 441

Parameters
T
D
S1 / V1
Plane selection
∅
C0
CP
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Choose whether the spindle should be clamped or released or whether
there should be no change (input field left blank).
Press the "Accept" softkey.
The values are saved and the window is closed. The process plan is
displayed and the newly generated program block is marked.
Description
Tool name
Cutting edge number
Spindle speed or
constant cutting rate
Select between the following machining surfaces:
Peripheral surface/Peripheral C

Peripheral surface Y - only if there is a Y axis

Face/Face C

Face Y - only if there is a Y axis

Turning

Diameter of the cylinder (for peripheral surface/peripheral surface C)
Positioning angle for machining area (for peripheral surface Y)
Positioning angle for machining area (for face Y)
Programming technology functions (cycles)
8.7 Further cycles and functions ShopTurn
Unit
rpm
m/min
mm
Degrees
Degrees
441