Siemens sinumerik 840D sl Operating Manual page 237

5. Stock removal (roughing)
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
7. Press the "Accept" softkey.
Finished-part contour
1. Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2. Enter the following technology parameters:
T Roughing tool 80 D1
3. Enter the following parameters:
Machining
Machining direction
Position
Machining direction
D 4.000 inc
Creating a ShopTurn program
7.18 Example: Standard machining
F 0.350 mm/rev V 400 m/min
Roughing (∇)
Longitudinal
external
(from front to back)
237