Scaling - Siemens SINUMERIK 828D Operating Manual

Hmi sl milling

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Scaling

You can specify a scale factor for the active machining plane as well as for the tool axis. The

programmed coordinates are then multiplied by this factor.

HMI sl Milling

Operating Manual, 06/2009, 6FC5398-7CP20-0BA0

Additive scaling

Scale factor XY

Scale factor Z

Programming technological functions (cycles)

8.5 Further cycles and functions ShopMill

Additive scaling

Sinumerik 840de sl Sinumerik 840d sl