Vpn Configuration Commands - D-Link DWC-1000 Reference Manual

Wireless Controller
119 net tahi start-RA-AdvCurHopLimit(15)
120 net tahi ipv6-dow n
121 net tahi ipv6-up
122 net tahi ipv6-global-up
123 net tahi ipv6-Alias-Add(LAN) <ltip6_address>
124 net tahi ipv6-Alias-Del(LAN) <ltip6_address>
125 net tahi ipv6-Alias-Add(OPTION) <ltip6_address>
126 net tahi ipv6-Alias-Del(OPTION) <ltip6_address>
127 net tahi neigh-cache-del
128 net tahi reachable-time <lttime>
129 net tahi mcast-start
130 net tahi mcast-stop
131 net tahi ping6 <ltip> <ltsize>
132 net tahi pmtu-route-add <ltipAdd>
133 net tahi disable-ipv6-firewall
134 net tahi show -LAN-ip
135 net upnp
136 net upnp configure

7.7 VPN configuration commands

The command vpn at the CLI prompt would give the description of all the configuration
commands in the branch vpn , which is as follows:
Sl No
1 vpn l2tp
2 vpn l2tp server
3 vpn l2tp server configure
4 vpn pptp client
5 vpn pptp client configure
6 vpn pptp client_action <ltaction>
7 vpn pptp
8 vpn pptp server
9 vpn pptp server configure
10 vpn sslvpn
11 vpn sslvpn portal-layouts
12 vpn sslvpn portal-layouts add
13 vpn sslvpn portal-layouts edit <ltrow_id>
14 vpn sslvpn portal-layouts delete <ltrow_id>
15 vpn sslvpn portal-layouts set-default <ltrow_id>
16 vpn sslvpn portforwarding
17 vpn sslvpn portforwarding appconfig
18 vpn sslvpn portforwarding appconfig add
19 vpn sslvpn portforwarding appconfig delete <ltrow_id> Delete an application configuration rule
20 vpn sslvpn portforwarding hostconfig
Com m and Nam e
34
CLI Reference Guide
start sending RA w ith
AdvCurHopLimit value as 15.
disable the ipv6 stack on the router.
enable the ipv6 stack on the router.
enable the ipv6 stack on the router
and adds global ip.
Add ipv6 address to LAN interface.
Delete an ipv6 address from LAN
interface.
Add ipv6 address to OPTION
interface.
Delete an ipv6 address from OPTION
interface.
deletes the ipv6 neighbor cache.
set the reachable time of neighbour
cache entries
start ipv6 multicast
stop ipv6 multicast
ping6 on LAN interface with count one
add ipv6 route on lan interface.
disable ipv6 firew all.
show ipv6 addresses of LAN
interface.
Upnp configuration mode
Upnp configuration mode
Purpose
vpn policy mode.
vpn policy mode.
l2tp server configuration mode
vpn policy mode.
pptp client configuration mode
vpn pptp client action set.
vpn policy mode.
vpn policy mode.
pptp server configuration mode
sslvpn configuration commands
sslvpn portal layout configuration
commands
Add sslvpn portal layout
Edit sslvpn portal layout
Delete sslvpn portal layout
Set the portal as default
sslvpn portforwarding configuration
commands
sslvpn portforwarding application
configuration commands
Add an application configuration rule
sslvpn portforwarding host