Wireless Controller
Chapter 7. Configuration commands
7.1 License Activation commands
The command license at the CLI prompt would give the description of all the
configuration commands in the branch license , which is as follows:
Sl No
1
license list
2
license activate <ltactivationKey>
7.2 Global configuration commands
The command top at the CLI prompt would give the description of all the configuration
commands in the branch top , which is as follows
Sl No
1
.top
The command reboot at the CLI prompt would give the description of all the
configuration commands in the branch reboot , which is as follows:
Sl No
1
.reboot
The command exit at the CLI prompt would give the description of all the configuration
commands in the branch exit , which is as follows:
Sl No
1
.exit
7.3 System configuration commands
The command system at the CLI prompt would give the description of all the
configuration commands in the branch system , which is as follows:
Sl No
1
system logging
2
system logging ipv4
3
system logging facility
4
system logging remote
5
system logging ipv6
6
system logging ipv4 configure
7
system logging facility configure <ltfacility>
Com m and Nam e
Com m and Nam e
Com m and Nam e
Com m and Nam e
Com m and Nam e
27
CLI Reference Guide
Purpose
List license on the device
activate a license on the device.
Purpose
Return to the default mode
Purpose
Reboot the system.
Purpose
Exit this session
Purpose
.
System logging configuration.
System log Facility configuration.
System remoteLogging configuration.
System ipv6 logs configuration.
System logging configuration mode.
System logging facility configuration
mode.