Panasonic KX-T336 System Reference Manual page 32

D. Administration
1.00 Introduction
Starting up the system administration can be
done using one of the following devices.
• VT220 (VT100)(default setting), Compatibles
• Dumb Terminal
• Attendant Console
Only one terminal can perform system
administration at any one time.
Starting up the system administration from a
remote location is available. For details about
Remote Operation, refer to Section 14-B-2.00
"System Administration from a Remote Location."
System Configurations
A. VT220 and Dumb terminal
Main Unit
#1
RC-232C Cable
#2
B. Attendant console
Attendant
console #1
Extension
Attendant
console #2
Extension
C. Remote operation
Main Unit
Central
Office
VT220,
compatibles,
or Dumb
Terminal.
Main Unit
A
T
L
C
Remote Terminal
Modem
1-D-1
2.00 System Interface
The programming and diagnostics features can
be accessed either locally or remotely using the
system RS-232C interface.
The system may be configured for local direct
access from the data terminal, or via a modem
connection that allows the data terminal to be
located at a greater distance from the system
than is allowed for an RS-232C interface.
For remote access, a data terminal and modem
are required at the maintenance location, and
the RMT card (Modem) at the system.
Two RS-232C interfaces are provided by the
system.
These connections provide communication either
locally or remotely between the system and
devices for programming and diagnostics,
external system programming data storage and
Station Message Detailed Recording (SMDR).
SIO #2 is used for SMDR only. SIO #1 is for
programming and diagnostics, and external
system programming data storage functions.
Typical devices would include VT220,
compatibles, personal computers and line
printers.
Refer to Section 9-D-7.00 "Communication
Interface" for further information.