Panasonic KX-T336 System Reference Manual page 899

4.00
$
C
In AT and BT modes, copies the setting data.
This function is effective for the following index
numbers of the respective command.
Command
CS1 01 to 32
CS2 01 to 32
*
TR1 1 to 8
or Entry number 200 to 999
TR2 01 to 64
AR1 200 to 999
AR2 01 to 32
AR3 01 to 32
AR4 01 to 64
* See Note on the next page.
Input Format
$CPY XXX XXX- XXX
<1> <2>
<1> Enter the index number of copy source
data.
<2> <3> Enter the first and last index numbers.
Note: Enter the index numbers in ascending order.
If you want to copy the source data to one
destination, enter the same index numbers
into <2> and <3> .
In AT mode, enter $CPY when the first item is
displayed. Copying is unavailable after the entry of
another item.
<Example>
Copying the data of "Class of Service No.1" to
"Class of Service No.2."
• In AT mode
Enter:
; PRG>CS1 AT 01 (
Displays:
; Class of Service No. 01
; 01:Toll Restriction Level (Day)
; INPUT>>
P Y
Index number
<3>
)
08
Enter:
$CPY 01 02-02 (
CS No.1 is copied to No.2 and displays
like the following:
; Class of Service No. 01
; 01:Toll Restriction Level (Day)
; INPUT>>
• In BT (Batch type) mode
Enter:
; PRG>CS1 BT 01 (
Displays:
CS1 BT01
Enter:
$CPY 01 02-02 (
The data of "Class of Service No.1" is copied to
that of No.2
Note: In TR1 command, copying by the Index
number or the entry number is available.
In this case, the input format is as follows:
$CPY 1 or 2 XXX XXX-XXX
Enter 1 to copy by the entry number.
Enter 2 to copy by the index number.
<Example>
Copying data of entry number 200 to entry
numbers 201 through 900, enter as follows:
$CPY 1 200 201-900
Copying data of Index numbers 1 to Index
number 2 through 8, enter as follows:
$CPY 2 1 2-8
8-E-3
(60395)
)
08
)
)
by Entry number
by Index number