Released Link Operation; Digits Restriction In Co Talk Mode - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

Released Link Operation

Disable
1.
Enable
2.
Disable
Used to turn on / off "Released Link Operation" mode of the
extension. When Released Link Operation is enabled, an extension
user will be automatically released from a call (extension, outside)
after transferring it to the destination, if the destination extension is
idle. This feature simplifies the transfer operation by eliminating
the need for going on-hook or pressing the RELEASE button after
transferring the call.
This feature is convenient for extension users, such as Operators,
who handle a large volume of calls.
• 1.3 System Features (F/G)
– Released Link Operation
• 2.4.3 Transferring a Call (U/M)

Digits Restriction in CO Talk Mode

Unrestricted
1.
Unrestricted
2.
1-15: the digits to be dialled out.
Specifies the maximum number of digits that can be dialled during
a CO call.
If the outside party hangs up during a CO call and the extension
user tries to dial out while still on the same CO line, the system will
disconnect the line at the instant the assigned number of digits are
dialled.
Note
• This programme can be added if the CPC Signal Detection is
not provided by the Central Office.
• 1.3 System Features (F/G)
– Calling Party Control (CPC) Signal Detection
System
73