GE LOGIQ E9 Service Manual page 550

PROPRIETARY TO GE
D 5180483-100, R . 7 LOGIQ E9 P S M
IRECTION EV ROPRIETARY ERVICE ANUAL
Table 7-99 Activating VPD Editor
Corresponding Graphic
Activating VPD Editor:
Once the application opens, navigate to
the task bar and look for the desktop
short cut for show Desk Top.
The desktop will display.
Now double-click on the "Vpdedit" icon
to launch the VPD Editor Application.
Now the VPD Edito r opens quickly since
the communication to the Card Rack is
already established through the system
applications.
NOTE: Make sure the Device column
lists the boards installed in the Card
Rack. This confirms that the VPD Editor
is able to read each board. If the Card
Rack boards are not detected as
installed, you need to close VPD Editor
and re-open.
Chapter 7 Diagnostics/Troubleshooting 7 - 347