Table of Contents
Advertisement
About SDI input signal format
SDI input signal format A is displayed in the screen of this unit during SDI
Mode. It may not be possible to set [REC FORMAT] depending on the signal
format.
≥ For setup of [REC FORMAT], refer to page 212.
≥ Confirm that this unit and the SDI output device is correctly connected and
the setup of the signal format for the SDI output device is correct when one
of the following messages is displayed.
j [INVALID SDI INPUT FORMAT. PLEASE CHANGE RECORD FORMAT.]
j [INVALID SDI INPUT FORMAT. PLEASE CHANGE IP FORMAT.]
j [UNDELIVERABLE FORMAT.]
j [INVALID SDI INPUT.]
∫ SDI signal format that can be input
SDI output of the
SDI output device
3G-SDI
HD-SDI
∫ SDI signal format that is compatible to the recording format of this unit
Recording format
PS 1080/59.94p
PS 1080/50.00p
PH 1080/59.94i, HA 1080/59.94i, HE 1080/59.94i
PH 1080/23.98p
PH 1080/50.00i, HA 1080/50.00i, HE 1080/50.00i
PH 1080/59.94i FROM 720p,
HA 1080/59.94i FROM 720p,
HE 1080/59.94i FROM 720p
PH 720/59.94p, PM 720/59.94p
PH 1080/50.00i FROM 720p,
HA 1080/50.00i FROM 720p,
HE 1080/50.00i FROM 720p
PH 720/50.00p, PM 720/50.00p
≥ Do not input an irregular signal or a signal with continuous disruption.
This may cause the device to restart or operate erratically.
≥ Start recording after confirming that an image signal is input.
Recording cannot be started if there is no image signal.
≥ Do not stop the signal being output to the external device or disconnect the cable during recording.
This may cause the clip to split up or prevent the recording from resuming.
1920k1080/59.94p/50.00p
1920k1080/59.94i/50.00i/29.97PsF/23.98PsF/25.00PsF/1280k720/59.94p/50.00p
- 95 -
Signal format
Signal format
1920k1080/59.94p
1920k1080/50.00p
1920k1080/59.94i, 1920k1080/29.97PsF
1920k1080/23.98PsF
1920k1080/50.00i, 1920k1080/25.00PsF
1280k720/59.94p
1280k720/50.00p
SDI IN 1080/59.94i
Advertisement
Table of Contents
