Panasonic AG-UMR20P Operating Instructions Manual page 72

<O.I.S.>
≥ Register <O.I.S.> to a USER button.
Switches the on/off of the image stabilization.
<ZEBRA>
≥ Register <ZEBRA> to a USER button.
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern A).
Press USER button or touch USER button
icon in the recording screen.
It will switch between the zebra display every time the
button is pressed.
*
Zebra 1 # Zebra 2 # setting canceled
* It is not displayed when the [ZEBRA DETECT 2] is set
to [OFF]. (l 223)
≥ This function is not available in the following cases:
j When [WFM] is set to [ON]
j During Freeze Frame
≥ You can record an image with little white saturation if you manually adjust the shutter speed or brightness not to
display zebra pattern.
≥ The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed.
≥ It is also possible to change the [ZEBRA MODE] setting to change the display time for the zebra pattern display.
(l 222)
(l 65)
(l
(l 65)
(l 77, 222)
(l 69)
(l 54, 58)
47)
(When Zebra 1 is set)
- 72 -
(l 223)
