Theater Network Setup; Ip Address Assignment - Sony LSM-100 Operating Instructions Manual

Theater Network Setup

The Auditorium Unit's configuration for connecting to the
Theater Network is via a dedicated network connection on
the SMS Server. Configuration of this connection is
realized using the Network Setup screen on the
Projectionist Terminal.
Settings available on the Network Setup screen apply to
the SMS Server's Theater Network connection only.
Typically, the Screen
Management System
Controller is connected to
the Theater Network. If
the Theater Network
settings are incorrect then
access to the Auditorium
Unit from the Screen
Management System
Controller is not possible.
To access Theater
Network Setup, tap Menu
and then tap Network
Setup. The Network
Setup screen appears
Two groups appear on the
Theater Network Setup
screen. They are; IP
ADDRESS ASSIGNMENT and DNS ADDRESS
ASSIGNMENT.

IP Address Assignment

The IP ADDRESS ASSIGNMENT group includes
settings for the SMS Server's IP address, the Subnet Mask,
16
Theater Network Setup
Tap
Tap Menu
Network Setup
Pop-Up Menu
and, when needed, the IP address of the Gateway between
the Auditorium Unit and the Theater Network.
IP ADDRESS ASSIGNMENT
Static
Subnet Mask
IP Address
Address assignments can be either Static or Automatic (if
DHCP is in use).
Static (IP address)
A static (or predetermined) IP address can be assigned
to the SMS Server's Theater Network connection. To
set the Static IP address option, tap STATIC in the IP
ADDRESS ASSIGNMENT group and enter the
values for IP Address, Subnet Mask and Gateway.
• IP Address
To set a static IP address, tap IP Address and the
Enter Address popup appears.
ENTER ADDRESS (popup)
Current
IP address
Keypad
To set a new IP address, tap CLEAR, set the new IP
address by tapping the numbers on the Keypad, and
then tap Accept.
Note: Entering the IP addresses from the ENTER
ADDRESS popup uses the "dotted decimal" format
and must include the "dot(s)" as part of the entry.
Automatic
Gateway
ACCEPT
CLEAR
"dot"
Accept