10.7
optiPoint Accessories
The following data is valid for the telephone families optiset E, optiPoint 410, optiPoint 420, op-
tiPoint 500 and for the telephone optiPoint 600 office. Restrictions are indicated in the relevant
places.
10.7.1
External AC Adapters
You may need an external AC adapter if you are using large configurations or if you need to
extend the range.
10.7.1.1
Local Power Supply for optiset E, optiPoint 500 and optiPoint 600 office
You can connect a local power supply to the line cords of a host or client telephone using two
MW6 jacks and the connection cable supplied (see Figure 10-32).
Variants
Local power supply, Euro: AUL:06D1284 (C39280-Z4-C71 = number entered on unit)
●
Local power supply, UK: AUL:06D1287 (C39280-Z4-C72 = number entered on unit)
●
Local power supply, 110 V USA: AUL:51A4827 (C39280-Z4-C73 = number entered on
●
unit)
Data for local power supply AUL:06D1284 (Euro)
Line voltage: 220 (230) Vac
●
AC line frequency: 47 ... 53 Hz
●
Output voltage: Max. 50 Vdc, min. 30 Vdc
●
Output current: Max. 250 mA
●
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
wclient.fm
Workpoint Clients
optiPoint Accessories
10-87