Positioning The Spindle - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Positioning the spindle

You can use this function to position the spindle at a specific angle, e.g. during a tool

• A stationary spindle is positioned via the shortest possible route.

• A rotating spindle is positioned as it continues to turn in the same direction.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Select the "T,S,M" softkey in the "JOG" mode.

Select the "Stop Pos." setting in the "Spindle M function" field.

The "Stop Pos." entry field appears.

Enter the desired spindle stop position.

The spindle position is specified in degrees.

Press the <CYCLE START> key.

The spindle is moved to the desired position.

Working in manual mode

4.2 Selecting a tool and spindle

Sinumerik 840d sl