Suzuki GRAND VITARA XL-7 Owner's Manual page 574

INSTALLATION
Install in reverse order of removal, noting the followings.
• Seat belt anchor bolts should have an unified fine thread (7/16-20 UNF). Under no circumstances should
any different sized or metric screw threads be used.
• Connect Yellow connector for seat belt pretensioner securely and fit seat belt pretensioner connector onto
front pillar lower panel, if necessary.
a) Connect connector
b) Lock connector with lock lever
• Enable air bag system referring to "ENABLING AIR BAG SYSTEM" under "SERVICE PRECAUTIONS" in
Section 10B, if necessary.
Seat belt switch
Check driver side seat belt strap switch for continuity by using
ohmmeter.
Seat belt strap switch specification
Without inserted buckle tongue to buckle catch:
Terminal "A" and "B" : Continuity
With inserted buckle tongue to buckle catch:
Terminal "A" and "B" : No continuity (∞Ω
1. Buckle tongue
2. Buckle catch
SEAT BELT 10A-5
∞Ω)
∞Ω ∞Ω