Suzuki GRAND VITARA XL-7 Owner's Manual page 21

0B-8 MAINTENANCE AND LUBRICATION
6) Replenish oil until oil level is brought to FULL level mark on
dipstick. (oil pan and oil filter capacity). The filler inlet is at
the top of the cylinder head cover.
It is recommended to use engine oil of SE, SF, SG, SH or SJ
grade.
NOTE:
Select the appropriate oil viscosity according to the proper
engine oil viscosity chart [A].
[A]: Proper engine oil viscosity chart
Engine oil specification :
Oil pan capacity liters (US/lmp pt.)
Oil filter capacity liters (US/lmp pt.)
Others liters (US/lmp pt.)
Total liters (US/lmp pt.)
NOTE:
Engine oil capacity is specified. However, note that the
amount of oil required when actually changing oil may
somewhat differ from the data in the table depending on
various conditions (temperature, viscosity, etc.)
7) Check oil filter and drain plug for oil leakage.
8) Start engine and run it for 3 minutes. Stop it and wait 5 min-
utes before checking oil level. Add oil, as necessary, to bring
oil level to FULL level mark on dipstick.
1. Full level mark (hole)
2. Low level mark (hole)
H27 engine
About 5.0 (10.6/8.8)
About 0.5 (1.1/0.9)
About 0.7 (1.5/1.2)
About 6.2 (13.1/10.9)