Entering Multi-Channel Data - Siemens SINUMERIK 840D sl Operating Manual

Procedure
10.2.2

Entering multi-channel data

In the parameter screen "multi-channel data", enter the following data, which apply for all
channels for G code and ShopTurn programs:
● Measurement unit
● Zero offset (e.g. G54)
● Z value of the zero offset (optional)
● Blank
● Speed limitation
● if required, data for the counter spindle
The data defined here are saved as cycle call in the job list.
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1. Select the "Program Manager" operating area.
2. Press the "NC" softkey and select the "Workpieces" folder.
3. Press the "New" and "programSYNC multi-channel" softkeys.
The "New job list" window opens.
4. Enter the required name and press the "OK" softkey.
The "Job list *.JOB" window opens.
For each channel that has been set-up, the window has one line to
input or select the assigned program.
5. Position the cursor on the required channel line, enter the required
program name and select the program type (G code or ShopTurn).
6. Press the "OK" softkey.
The "Multi-channel data" parameter screen opens in the editor.
Machine manufacturer
If you are working with pure G code programming, it is possible that the parameter
screen "multi-channel data" does not open.
Please refer to the machine manufacturer's instructions.
Multi-channel support
10.2 Multi-channel editor
539