Setting The Pf Protection - Toshiba GRE110 Instruction Manual

M E F 2
D / I E C /
M S E 1
D / I E C /
M S E 2
D / I E C /
S V C N T
A L M & B L K /
<MOC1>, <MEF1>, <MSE1>, <MOC2>, <MEF2>, <MSE2>
To set the OC1, EF1, SE1, OC2, EF2 and SE2 time delay characteristic type, do the following.
• Enter 0(=D, Definite Time) or 1(=IEC) or 2(=IEEE), 3(=US) or 4(=C, Configurable) and press
the ENTER key.
<SVCNT>
Set the alarming and tripping block, or only alarming when a failure is detected by the automatic
supervision.
• Enter 0(=ALM&BLK, alarming and tripping block) or 1(=ALM, only alarming) and press the
ENTER key.

Setting the PF protection

• Select "PF prot." to display the "PF prot." screen.
/ 7 P F p r o
O C 1 E N
> O C 1 E N
O f f / O n
M O C 1 C - I E C
N I / V I / E I
M O C 1 C - I E E E
M I / V I / E I
M O C 1 C - U S
C O 2 / C O 8
O C 1 R
D E F / D E P
O C 1 - 2 F
N A / B l o c k
O C 2 E N
O f f / O n
M O C 2 C - I E C
N I / V I / E I
1
I E E E / U S / C
1
I E E E / U S / C
1
I E E E / U S / C
1
A L M
t .
_
1
0
This setting is displayed if [MOC1] is 1(=IEC).
/ L T I
0
This setting is displayed if [MOC1] is 2(=IEEE).
0
This setting is displayed if [MOC1] is 3(=US).
0
This setting is displayed if [MOC1] is 2(=IEEE),
3(=US) or 4(=C).
0
1
0
This setting is displayed if [MOC2] is 1(=IEC).
/ L T I
 118 
Not available for model 820 series.
Not available for model 400 series.
Not available for model 400 series.
Not available for model 820 series.
6 F 2 T 0 1 7 2