Table of Contents
Advertisement
Speaker
Description
Speaker (includes speaker and cables)
Before removing the speaker, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cables from the system board (see
Remove the speaker:
1.
Unsolder the speaker cables (1) from the system board terminals.
NOTE:
board "+" terminal, and the speaker black cable should be soldered to the "-" terminal.
2.
Release the speaker cable (2) from the retention clip built into the display panel assembly.
Back cover on page
When installing the speaker, the speaker red cable should be soldered to the system
11).
Battery on page
Spare part number
785190-001
13).
Speaker
15
Advertisement
Table of Contents
