The Setup Main screen appears, displaying current parame-
ter settings.
When you press
detects current parameter settings with the Power-On Self-
Test (POST).
If the system detects an error during POST, it prompts you
with a double beep and a message: "Press <F1> to resume
boot attempt, <F2> for Setup." If you press
tinues. If you want to fix the error, carefully read the error
message that appears above the prompt (taking notes if you
want), and press
After you press
screen.
How to Use Setup
The following sections describe how to use Setup, including
these topics:
T
Looking at screens
T
Using keys
T
Checking and setting system parameters.
Looking at Screens
Setup screens look similar to the one shown next and have
four basic areas.
3-2 Using Setup and Power Management
F2
to enter Setup, the system automatically
.
F2
F2
, the system displays the Setup Main
F1
, POST con-