Summary of Contents for ZyXEL Communications EMG5324-D10A
Page 1
Quick Start Guide Wireless N GbE VoIP IAD with Firmware Version 3.00 Edition 1, 4/2012 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 Username: Admin account: admin User account: user Password: Admin account: 1234 User account: 1234 2012 ZyXEL Communications Corporation www.zyxel.com...
Page 2
Device Panels Front INTERNET WLAN/WPS ETHERNET 1‐4 USB1,2 LEDS LEDS PHONE1,2 POWER WLAN/WPS LEDS BUTTON Back ON/OFF BUTTON PORT POWER ETHERNET PHONE RESET PORT PORT 1‐4 PORT PORT 1,2 BUTTON...
Page 3
Internet). • 3G account: if you want to access the Internet through a 3G network. The EMG5324-D10A uses this 3G connection as your WAN or a backup when the Ethernet WAN connection fails. • WEB BROWSER: Internet Explorer 6.0 and later versions, with JavaScript enabled, or Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions.
Page 5
Ethernet cable to connect a computer to one of these ports for initial configuration and/or Internet access. 3. USB 2.0: There are two USB ports on your EMG5324-D10A, one is at the back panel and one is at the side panel. You can do the following: a.
3G adapter connected to the EMG5324-D10A and blinks when transmitting data. If the POWER light does not turn on during start up, try turning the EMG5324-D10A off, check the connections, wait a few seconds and then turn it back on. If the problem persists, you may have a hardware problem and you need to contact your vendor.
Setting Up a Wireless Connection If you want to set up a wireless connection using the EMG5324-D10A, you can use the wireless SSID (network name) and the encryption key located in the back panel. If you wish to use WPS (Wi-Fi Protected Setup), please refer to the User’s Guide.
Page 8
2. Select the EMG5324-D10A’ SSID name and click Connect (A). The SSID “SecureWirelessNetwork” is given here as an example. 3. You are prompted to enter a password. Enter the encryption key (WPA-PSK) found in the back panel of the EMG5324-D10A and click Connect.
If you cannot connect wirelessly to the EMG5324-D10A, check that you have selected the correct SSID and entered the correct security key. If that does not work, ensure that the WLAN/WPS LED on the front panel is turned on.
Page 10
3. Click Login. If the login screen does not open, make sure you allow web browser pop-up windows, JavaScript and Java permissions. Your computer should also be set to get an IP address automatically from a DHCP server. See your User’s Guide for more information.
Page 11
View a Product’s Certification(s) Go to www.zyxel.com to view this product’s documentation and certifications. For more information, please refer to the User’s Guide on the provided CD or at the www.zyxel.com download library.