General Characteristics; Profiles - Hitachi HDR5T01 Instruction Manual

GENERAL CHARACTERISTICS

Power supply for set-top box: 12 V DC 2Amp
Preffered DC Adaptor: 220 - 240 V AC, 50-60Hz
Input Frequency
Frequency Band
Maximum Power consumption
Standby Power Consumption
Operating temperature
Storage temperature
Humidity
Physical dimensions
Weight
HARDWARE CONFIGURATION
Main Processor
Flash Memory
DDRRAM
DIGITAL CAPABILITIES
Transmission Standards
Frequency Band
DEMODULATION
COFDM with 2K/8K FFT mode.
FEC for all DVB Modes.(Automatically found)
16QAM, 64QAM, 256QAM with 1k, 2k, 4k, 8k, 16k, 32k FFT mode
VIDEO
ALL MPEG-4 (part 10) MP@ML Video Decoder
Aspect Ratio
RGB analogue outputs.
CVBS analogue output.

Profiles

MPEG-4 H.264/AVC HP@L 4.0, MP@L 4.0 (HD)
- H.264/AVC MP@L 3 .2, HP@L 3 .2 (SD)
- MPEG-2 MP@HL, MP@ML (SD)
AUDIO
MPEG1 Layer 1 and 2
Sampling frequencies supported
Output can be programmed as STEREO, LEFT only or RIGHT only (on both outputs). This is useful for dual
mono channels in order to select the correct sound track, which is stored for every channel.
Wide dynamic range
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
470Mhz-862Mhz
UHF
17,5 W
0,5 W
5ºC to +40ºC
-15ºC to +55ºC
25 to 75 % rel
231x137x43mm
0,9kg
BCM7230
64 MB
512 MB
MPEG2, MPEG4 HD DVB-T-2
UHF
4:3, 16:9 with pan vector
BW ≥ 5MHz at 0.5 to 5 MHz sweep signal
32 kHz, 44.1 kHz or 48 kHz.
16-bit resolution
- 29 -