Before Installing The Appliance - Miele K 34472 iD Operating And Installation Instructions

Top ventilation gap
The ventilation gap at the top of the ap‐
pliance can be constructed in different
ways:
a directly above the appliance with a
ventilation grille (free airflow of at
least 200 cm²).
b in between the housing unit and the
ceiling
c through a suspended ceiling.

Before installing the appliance

 Take the accessory pack which in‐
cludes installation parts and other ac‐
cessories out of the appliance and
remove the packaging strap holding
the door in place.
 Do not remove the following from
the back of the appliance:
– The spacers (depending on model).
These ensure the gap required be‐
tween the back of the appliance and
the wall is maintained.
– Depending on model, the pouches
located in the metal grille (heat ex‐
changer).
They are required for the correct
functioning of the appliance. The
contents are not poisonous or dan‐
gerous.
 Remove the cable clip from the back
of the appliance.
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Installation
65