Honda 1994 Prelude Online Reference Owner's Manual page 88

Cassette Search Functions
Once a cassette is playing, you can
use the FF, REW, TMS, or
REPEAT function to look for
desired songs or passages.
To rewind the tape, push the FF/
REW/TMS switch down then
release it. You will see REW in the
display. To fast forward the tape,
push the switch up then release it.
You will see FF displayed. To stop
rewind or fast forward, press the
PLAY button. If the system
reaches the end of the cassette
while in fast forward or rewind, it
automatically stops that function,
reverses direction, and begins to
play.
Press the REPEAT button to
replay the current passage. You
will see RPT displayed. When the
system reaches the end of the song
or passage that is being played, it
automatically goes into rewind.
When it senses the beginning of
that passage, it goes back to play.
The system will continue repeating
this passage until you turn off
REPEAT by pressing the button
again.
The TMS function lets you skip to
the beginning of a song or other
passage. The tape skips forward or
backward, depending on which
direction you push the FF/REW/
TMS switch.
Activate TMS by pushing the FF/
REW/TMS switch and holding it
until you hear a beep. If you push
the switch down, you will see REW
blinking in the display as the tape
rewinds. If you push the switch up,
you will see FF blinking in the
display as the tape fast forwards.
When the system senses a silent
period on the tape, it goes back to
PLAY mode.
Audio System
The REPEAT and TMS functions
use silent periods on the tape to
find the end of a selection. These
features may not work satisfacto-
rily on tapes that have almost no
gap between songs, a high noise
level between songs, or silent peri-
ods in the middle of songs.
Caring For Cassettes
Damaged cassettes can jam inside
the drive or cause other problems.
See page 94 for information on
cassette care and protection.
Comfort and Convenience Features