Key Fobs - GE Simon XTi User Manual

Action
Arm doors and windows
Arm motion sensors
Arm doors, windows, and
motion sensors
Listen in to house
Check status
Hang up

Key fobs

Touchpads are used to control the security system from any location within or near
your home.
Key fob
If your installer programmed the key fob with no entry delay, and you arm the system
with the key fob, you must disarm your system before entering the home to avoid
causing an alarm.
If your installer programmed your system for remote touchpad arming, you must
enter your home to start the entry delay before you can use your key fob to disarm
the system.
Caution: To avoid causing false alarms, check with your installer on how your
touchpad/key fob options are programmed.
Panic alarms need to be silenced from the panel, a remote touchpad, or another key
fob. They cannot be silenced from the same key fob that activated the alarm.
For any key press on the key fob, hold the button until the indicator light blinks. The
key fob has the following buttons:
• Lock (closed lock icon)
• Unlock (open lock icon)
• Star (star icon)
• Light (light bulb icon)
Table 8 on page 16 describes how to use the key fob buttons.
Simon XTi User Manual
Phone key presses
2
3
2 3
5 to listen in to the house
Once in listen in to house the
following options are available:
• 0 or 1 to speak
• 3 or 6 to listen
• 7 to extend call
0
9
Comments
Press 2 again to activate the no
delay feature
When in this mode, the user cannot
re-enter the previous menu. You
must hang up and call back in to
the panel to perform additional
functions.
15