Honeywell 3014D Owner's Manual page 7

SAFE SERIAL NUMBER
Whenever contacting our Consumer Assistance Department, you will need to provide them
with the serial number of your safe.
NOTE: Record your safe's serial number and combination and store in a secure location
OTHER THAN YOUR SAFE.
SAFETY PRECAUTIONS
The safe door is heavy. Do not open the door with the safe on an uneven or unstable floor.
Hanging on an open door may cause the safe to tip forward when not secured to a wall or the
floor, resulting in serious injury or death to yourself or others. If you have small children in your
home, please make sure you never leave your safe unsecured. It is possible for small children
to climb inside your safe and become locked in. This could result in serious injury or death.
INSTALL BATTERIES
For your convenience, we have included 4 "AA" Alkaline Batteries that provide the power for
the electronic locking system. These batteries must be installed before using your safe. The
battery compartment is located behind the digital keypad
1. To access the compartment, locate the
tab at the top of the keypad.
2. Place your hand on the keypad tab and
pull forward.
3. With the tab pulled forward, rotate the
keypad counterclockwise to the left and
pull keypad out.
4. Install the 4 "AA" batteries on the inside
of the battery compartment. Proper
installation of the batteries will cause the
keypad to beep twice and the green LED
to light up.
5. Once the batteries are installed, position
the keypad back onto the mounted
bracket and rotate clockwise to the right
to lock in place.
Your safe's serial number is on a tag that is located
on the front of the safe in the lower right corner.
IMPORTANT: Do Not Remove Safe I.D. Tags!
1.
3.
2
2.
4.