Clock And Alarm Settings - AEG Boomerang 15 User Manual

11.3.3 Edit a Redial Number
• From the home screen, press
• Press to select an entry and then press
• Press to "EDIT ENTRY" and then press
• Edit the number and press
>A confirmation tone is played.
• Press to return to standby mode.
11.3.4 Delete a Redial Number
• From the home screen, press
• Press to select an entry and then press
• Press to "DELETE" and then press
>"CONFIRM?" is displayed.
• Press again to confirm.
>A confirmation tone is played.
• Press to return to standby mode.
11.3.5 Delete All Entries from the Redial List
• From the home screen, press
• Press .
• Press to "DELETE ALL" and then press
>"CONFIRM?" is displayed.
• Press again to confirm.
>A confirmation tone played.
12.

CLOCK AND ALARM SETTINGS

12.1 Date and Time Settings
If you have subscribed to the Calling Line Identification service, the time and date settings will be
automatically updated by the network when you receive an incoming call, but you may still need to set
the correct year.
You can also set the date and time manually.
• From the home screen, press
• Press to "CLOCK&ALARM" and the press
• Press again to select "DATE & TIME".
>The last stored date is displayed, with the third digit of the year flashing.
• Enter the current date and press
>Enter 03 May 2012 as [1], [2], [0], [5], [0], [3].
>If you make a mistake, press
• Enter the current time and press
time format, see Change the Date Format on page 51.)
>For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
>For 12-hour format, enter the time and then press + to select am , or press- to select pm.
>If you make a mistake, press
>A confirmation tone is played.
• Press to return to standby mode.
.
to select.
to confirm.
.
.
to select.
.
to select.
.
to confirm.
to delete the last digit entered.
to confirm. The default time format is 24 HOURS. (To change
to delete the last digit entered.
.
to select.