Makita 1600 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Planer
  5. 1600
  6. Instruction manual

Makita 1600 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Power Planer
1600
013491
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita 1600

Summary of Contents for Makita 1600

  • Page 1 INSTRUCTION MANUAL Power Planer 1600 013491 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 1600 Planing width 80 mm Planing depth 3 mm No load speed (min 16,000 Overall length 375 mm Net weight 5.0 kg Safety class Class I • Due to our continuing program of research and development, the specifications herein are subject to change without notice.

  • Page 3: Planer Safety Warnings

    moving parts. Damaged or entangled cords 19. Do not use the power tool if the switch does increase the risk of electric shock. not turn it on and off. Any power tool that When operating a power tool outdoors, use an cannot be controlled with the switch is dangerous extension cord suitable for outdoor use.

  • Page 4: Functional Description

    15. Always change both blades or covers on the 2. Switch trigger drum, otherwise the resulting imbalance will cause vibration and shorten tool life. 16. Use only Makita blades specified in this manual. 17. Always use the correct dust mask/respirator for the material and application you are working with.
  • Page 5 Thus the triangular rule is flush with the removing or installing the blades. entire width of the blade edge. Use only the Makita wrench provided to remove or • After adjusting both blades, tighten the three installation install the blades. Failure to do so may result in bolts evenly and alternately with the hex wrench.

  • Page 6: Correct Setting

    (A) Front base (Movable shoe) (B) Rear base (Stationary shoe) Although this side view cannot Correct setting show it, the edges of the blades run perfectly parallel to the rear base surface. Cause: One or both blades fails to Nicks in surface have edge parallel to rear base line.

  • Page 7: Replacing Carbon Brushes

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 013499 In this condition, hold sharpening holder so that both blades are brought fully into contact with the dressing stone.
  • Page 8 Makita Corporation www.makita.com 883002D9...

Table of Contents