Required Tools - NEC Versa AX Disassembly Manual

Required Tools

All Versa AX maintenance procedures can be performed using the following tools:
n
Tweezers
n
Small flat-head screwdriver
n
Small Philips screwdriver
n
Right-angled dentist style probe
Disassembly Instructions
This document contains step-by-step disassembly instructions for the Versa AX. The instructions are
clarified by images of the part that is being removed or disassembled. Furthermore, the screws that are
removed are shown next to the image of the parts themselves.
When disassembling the system unit, follow these general rules.
n
Do not disassemble the system into parts that are smaller than those specified in
the instructions.
n
Label all removed connectors. Note where the connector goes and in what
position it was installed.
n
Turn off the power and disconnect all power and all options. Also remove any
PC-Cards that are in the PCMCIA slot.
Disassembly and Reassembly - 2