Recording A Cd/Video Cd - Sony MHC-V909AV Operating Instructions Manual

Playing a CD (continued)
To Do this
Stop playback Press p.
Pause Press ·∏ (or P on the
remote). Press again to resume
play.
Select a track During playback or pause,
turn the jog dial clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you reach
the desired track. Or press +
(to go forward) or = (to go
back) on the remote.
Find a point in Press and hold down ) or
a track 0 during playback and
release it at the desired point.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Play only the Press 1/ALL DISCS
CD you have repeatedly until "1 DISC"
selected appears.
Play all CDs Press 1/ALL DISCS repeatedly
until "ALL DISCS" appears.
Remove the CD Press § OPEN/CLOSE.
Exchange other Press DISC SKIP
CDs while EX-CHANGE (or D. SKIP on
playing the remote).
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
• Pressing ·∏ when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·∏ or the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.
18
05/15-28_MHC-V909AV.11E
Actual page number:
Recording a CD/VIDEO
CD
— CD Synchro Recording
The CD SYNCHRO button lets you record
audio sources from a CD/VIDEO CD to a
tape easily. You can use TYPE I (normal) or
TYPE II (CrO
POWER
18
SONY MHC-V909AV (E) 3-860-316-11
) tapes.
2
DISC SKIP
2
EX-CHANGE
4 3 5
π
DOLBY NR
98.11.9, 11:46 AM
1