Linksys WRT54G3G User Manual
  1. Manuals
  2. Brands
  3. Linksys Manuals
  4. Wireless Router
  5. WRT54G3G - Wireless-G Router For Verizon Wireless...
  6. User manual
Linksys WRT54G3G User Manual

Linksys WRT54G3G User Manual

Router for 3g/umts broadband
Hide thumbs Also See for WRT54G3G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Product Data, User Manual
®
A Division of Cisco Systems, Inc.
2,4
GHz
Wireless-G
802.11g
Router for 3G/UMTS Broadband
WIRELESS

User Guide

WRT54G3G (EU)
Model No.

Advertisement

Table of Contents
loading

Related Manuals for Linksys WRT54G3G

Summary of Contents for Linksys WRT54G3G

  • Page 1: User Guide

    ® A Division of Cisco Systems, Inc. Wireless-G 802.11g Router for 3G/UMTS Broadband WIRELESS User Guide WRT54G3G (EU) Model No.
  • Page 2 Wireless-G Router for 3G/UMTS Broadband Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Wireless-G Router for 3G/UMTS Broadbands Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Wireless Network Network Topology Ad-Hoc versus Infrastructure Mode Network Layout Chapter 3: Getting to Know the Wireless-G Router for 3G/UMTS Broadband The Router’s Ports The Router’s LEDs The Router’s 3G/UMTS Slot...
  • Page 4 Wireless-G Router for 3G/UMTS Broadbands Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband Overview The Setup Tab - Basic Setup The Setup Tab - 3G/UMTS Network The Setup Tab - DDNS The Setup Tab - MAC Address Clone The Setup Tab - Advanced Routing The Wireless Tab - Basic Wireless Settings The Wireless Tab - Wireless Security The Wireless Tab - Wireless MAC Filter...
  • Page 5 Wireless-G Router for 3G/UMTS Broadbands Appendix D: Windows Help Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter Windows 98SE or Me Instructions Windows 2000 or XP Instructions For the Router’s Web-based Utility Appendix F: Glossary Appendix G: Specifications Appendix H: Warranty Information Appendix I: Regulatory Information...
  • Page 6 Wireless-G Router for 3G/UMTS Broadband List of Figures Figure 3-1: The Router’s Ports Figure 3-2: The Router’s Front Panel Figure 3-3: The Router’s LEDs Figure 3-4: The Router’s LEDs Figure 4-1: Connect Your Computer Figure 4-2: Connect the Power Figure 4-3: Connect the Broadband Modem Figure 4-4: Connect Your Computer Figure 4-5: Connect the Power Figure 4-6: Diagram for Connection to Another Router...
  • Page 7 Wireless-G Router for 3G/UMTS Broadband Figure 5-16: Configure Wireless Security Settings Screen Figure 5-17: Warning about Disabled Wireless Security Screen Figure 5-18: Configure Wireless Security Settings - WPA-Personal Screen Figure 5-19: Configure Wireless Security Settings - WEP (64-Bit) Screen Figure 5-20: Confirm New Settings Screen Figure 5-21: Congratulations Screen Figure 6-1: Setup Wizard’s Welcome - Language Selection Screen Figure 6-2: Setup Wizard’s Welcome - Start Wizard Screen...
  • Page 8 Wireless-G Router for 3G/UMTS Broadband Figure 7-8: Connect the Router to a Computer Screen, continued Figure 7-9: Power on the Router Screen Figure 7-10: Check the Router’s Status Screen Figure 7-11: Insert Vodafone Mobile Connect Card Screen Figure 7-12: Check SIM Card Screen Figure 7-13: Need to Upgrade Vodafone Card Screen Figure 7-14: Configure Vodafone 3G/UMTS or GPRS Services Screen Figure 7-15: Configure Vodafone 3G/UMTS or GPRS Services - Review...
  • Page 9 Wireless-G Router for 3G/UMTS Broadband Figure 8-14: Setup Tab - DDNS (DynDNS.org) Figure 8-15: Setup Tab - DDNS (TZO.org) Figure 8-16: Setup Tab - MAC Address Clone Figure 8-17: Setup Tab - Advanced Routing (Gateway) Figure 8-18: Setup Tab - Advanced Routing (Router) Figure 8-19: Wireless Tab - Basic Wireless Settings Figure 8-20: Wireless Tab - Wireless Security (WPA Personal - TKIP) Figure 8-21: Wireless Tab - Wireless Security (WPA Personal - AES)
  • Page 10 Wireless-G Router for 3G/UMTS Broadband Figure 8-48: Administration Tab - Config Management Figure 8-49: Status Tab - 3G/UMTS Figure 8-50: Status Tab - Router Figure 8-51: Status Tab - Local Network Figure 8-52: Status Tab - Wireless Figure C-1: Upgrade Firmware Figure E-1: IP Configuration Screen Figure E-2: MAC Address/Adapter Address Figure E-3: MAC Address/Physical Address...

  • Page 11: Chapter 1: Introduction Welcome

    Wireless-G Router for 3G/UMTS Broadband Chapter 1: Introduction Welcome Thank you for choosing the Linksys Wireless-G Router for 3G/UMTS Broadband. The Wireless-G Router for 3G/UMTS Broadband will allow you to network wirelessly better than ever, sharing Internet access, files and fun, easily and securely.

  • Page 12: What's In This User Guide

    Wireless-G Router for 3G/UMTS Broadband Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then use the instructions in this Guide to help you connect the Wireless-G Router for 3G/UMTS Broadband, set it up, and configure it to bridge your different networks.
  • Page 13 • Appendix I: Regulatory Information This appendix supplies the regulatory information regarding the Router. • Appendix J: Contact Information This appendix provides contact information for a variety of Vodafone and Linksys resources, including Technical Support. Chapter 1: Introduction What’s in this User Guide?

  • Page 14: Chapter 2: Planning Your Wireless Network

    Wireless-G Router for 3G/UMTS Broadband Chapter 2: Planning Your Wireless Network Network Topology A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each computer in the WLAN uses a wireless device to connect to the network. Computers in a WLAN share the same frequency channel and SSID, which is an identification name shared by the wireless devices belonging to the ssid (service set identifier): your wireless network’s name.
  • Page 15 3G/UMTS Broadband’s four Ethernet LAN ports. To add more ports, any of the Router's LAN ports can be connected to any of Linksys's switches. With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at www.linksys.com/international for more information about products that work with the Wireless-G Router for 3G/UMTS Broadband.

  • Page 16: Chapter 3: Getting To Know The Wireless-G Router For 3G/Umts Broadband

    Wireless-G Router for 3G/UMTS Broadband Chapter 3: Getting to Know the Wireless-G Router for 3G/UMTS Broadband The Router’s Ports The Router's ports and Reset button are located on the side panel with the antenna port. Figure 3-1: The Router’s Ports (Antenna) The antenna port is where you will attach the Router’s antenna.

  • Page 17: The Router's Leds

    Wireless-G Router for 3G/UMTS Broadband The Router’s LEDs The Router’s LEDs are located on the Router’s other side panel. Figure 3-3: The Router’s LEDs 3G/UMTS Button This button allows you to connect to and disconnect from the 3G/UMTS or GPRS network (you can also connect and disconnect using the Basic Setup tab of the Router’s Web-based Utility).

  • Page 18: The Router's 3G/Umts Slot

    Wireless-G Router for 3G/UMTS Broadband The Router’s 3G/UMTS Slot The Router’s 3G/UMTS slot is located on the Router’s top panel. Figure 3-4: The Router’s LEDs 3G/UMTS Slot Insert the Vodafone Mobile Connect 3G/UMTS data card (available separately) into this slot if the Router will connect to a 3G/UMTS or GPRS service.

  • Page 19: Chapter 4: Connecting The Wireless-G Router For 3G/Umts Broadband Overview

    Wireless-G Router for 3G/UMTS Broadband Chapter 4: Connecting the Wireless-G Router for 3G/UMTS Broadband Overview Most users who are connecting the Router to the Internet for the first time can proceed to the appropriate chapter about the Setup Wizard and use this chapter as reference on how to connect the hardware. There are three chapters about the Setup Wizard available.

  • Page 20: Figure 4-1: Connect Your Computer

    Wireless-G Router for 3G/UMTS Broadband 4. Connect your network PCs or Ethernet devices to the Router’s numbered ports using standard Ethernet network cabling. Figure 4-1: Connect Your Computer 5. Connect the power adapter to the Router's Power port, and plug the other end into an electrical outlet. Only IMPORTANT: Make sure you use the power use the power adapter supplied with the Router.

  • Page 21: Hardware Installation For Connection To Your Broadband Modem

    Wireless-G Router for 3G/UMTS Broadband Hardware Installation for Connection to Your Broadband Modem 1. Power down your network devices. 2. Locate an optimum location for the Router. The best place for the Router is usually at the center of your wireless network, with line of sight to all of your mobile stations.

  • Page 22: Figure 4-4: Connect Your Computer

    Wireless-G Router for 3G/UMTS Broadband 5. Connect your network PCs or Ethernet devices to the Router’s numbered ports using standard Ethernet network cabling. Figure 4-4: Connect Your Computer 6. Connect the power adapter to the Router's Power port, and plug the other end into an electrical outlet. Only IMPORTANT: Make sure you use the power use the power adapter supplied with the Router.

  • Page 23: Hardware Installation For Connection To Another Router

    Hardware Installation for Connection to Another Router NOTE: Steps 1-4 are instructions for a typical Linksys router; however, if you are using a non- Linksys router, refer to the other router’s Before you install the Wireless-G Router for 3G/UMTS Broadband, you must change the default IP address of the documentation for instructions on how to change its other router.

  • Page 24: Figure 4-8: Connect Your Computer

    Wireless-G Router for 3G/UMTS Broadband 9. Decide which network computers or Ethernet devices you want to connect to the Router. Disconnect the selected computers or devices from the other router, and then connect them to the Router’s numbered ports using standard Ethernet network cabling. Figure 4-8: Connect Your Computer 10.

  • Page 25: Placement Options

    Wireless-G Router for 3G/UMTS Broadband Placement Options There are three ways to place the Router. The first way is to place it horizontally on a surface, so it sits on its four rubber feet. The second way is to stand the Router vertically on a surface. The third way is to mount it on a wall. The second and third options are explained in further detail below.

  • Page 26: Figure 4-11: Measurement Between Wall-Mount Slots

    Wireless-G Router for 3G/UMTS Broadband Wall-Mount Option The Router has four wall-mount slots on its bottom panel. The distance between two adjacent slots is 68 mm 68 mm (2,68 inches). (2,68 inches) Before you begin, make sure you have two screws that are size #4—this indicates a diameter measurement of 2,845 mm (0,112 inches).

  • Page 27: Chapter 5: Setting Up The Wireless-G Router For 3G/Umts Or Gprs Service

    Wireless-G Router for 3G/UMTS Broadband Chapter 5: Setting up the Wireless-G Router for 3G/UMTS or GPRS Service Overview This chapter covers the steps for configuring the Router for 3G/UMTS or GPRS service. If you want to configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only.”...

  • Page 28: Using The Setup Wizard

    Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\WRT54G3G.exe (if “D” is the letter of your CD-ROM drive). 2. The Setup Wizard will automatically detect the language setting of your PC. On the initial Welcome screen, click the Next button if you want to proceed with the Setup Wizard using the current language.

  • Page 29: Figure 5-3: Select Service Screen

    Wireless-G Router for 3G/UMTS Broadband 4. Click the 3G/UMTS or GPRS radio button to configure the Router for 3G/UMTS or GPRS service. NOTE: If you click the Broadband WAN Only radio button to configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only.”...

  • Page 30: Figure 5-5: Connect The Router To A Computer Screen

    Wireless-G Router for 3G/UMTS Broadband 7. Connect the included Ethernet network cable to the Ethernet network port of your computer. (This cable is color-coded yellow to match the yellow Ethernet ports on the Router.) Click the Next button. Figure 5-5: Connect the Router to a Computer Screen 8.

  • Page 31: Figure 5-7: Power On The Router Screen

    Wireless-G Router for 3G/UMTS Broadband 9. Connect the power adapter to the Router’s Power port. Plug the other end into an electrical outlet. Click the Next button. Figure 5-7: Power on the Router Screen 10. Make sure the LEDs on the Router light up. The Power LED will flash for a few seconds while the Router goes through its self-diagnostics test.

  • Page 32: Figure 5-9: Insert Vodafone Mobile Connect Card Screen

    Wireless-G Router for 3G/UMTS Broadband 11. If you do NOT see the Insert Vodafone Mobile Connect Card screen, proceed to step 13. If the Vodafone Mobile Connect 3G/UMTS Card is not inserted or recognized, you will be prompted to insert your Vodafone Mobile Connect 3G/UMTS Card.

  • Page 33: Figure 5-12: Configure Vodafone 3G/Umts Or Gprs Services Screen

    Wireless-G Router for 3G/UMTS Broadband 14. Based on the settings of the SIM card, the following information will be displayed: Home Network, Service, 3G/UMTS/GPRS Connection, APN, Username (depending on the country), Password (depending on the country), and Pin Code (depending on the SIM card). Service - Select the appropriate services from the Service options: 3G/UMTS Preferred (Recommended), 3G/UMTS Only, or GPRS Only.

  • Page 34: Figure 5-14: Set The Router's Password Screen

    17. The Setup Wizard will ask you to enter the settings for your wireless network. Wireless Network Name - In the Wireless Network Name field, enter the name of your wireless network, also called the SSID. The name must be identical for all devices in the network. The default setting is linksys (all lowercase).

  • Page 35: Figure 5-16: Configure Wireless Security Settings Screen

    Disabled and use the Router’s Web-based Utility to configure your wireless security radius (remote authentication dial-in user service): a protocol settings. Click the Next button. You will see a warning message. Linksys strongly recommends that you that uses an authentication server to control network access.

  • Page 36: Figure 5-18: Configure Wireless Security Settings - Wpa-Personal Screen

    Passphrase - Enter a passphrase, and then click the Generate button, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless Figure 5-18: Configure Wireless Security Settings - products only.

  • Page 37: Figure 5-20: Confirm New Settings Screen

    Wireless-G Router for 3G/UMTS Broadband 19. The Setup Wizard will ask you to review your settings before it saves them. Click the Yes button if you are satisfied with your settings, or click the No button if you do not want to save your new settings. Figure 5-20: Confirm New Settings Screen 20.

  • Page 38: Chapter 6: Setting Up The Wireless-G Router For Broadband Wan Service Only

    Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\WRT54G3G.exe (if “D” is the letter of your CD-ROM drive). 2. The Setup Wizard will automatically detect the language setting of your PC. On the initial Welcome screen, click the Next button if you want to proceed with the Setup Wizard using the current language.

  • Page 39: Figure 6-2: Setup Wizard's Welcome - Start Wizard Screen

    Wireless-G Router for 3G/UMTS Broadband 3. On the following Welcome screen, click the Click Here to Start button if this is the first time you are running the Setup Wizard. These are your other choices: User Guide - Click the User Guide button to open the PDF file of this User Guide. Exit - Click the Exit button to exit the Setup Wizard.

  • Page 40: Figure 6-4: Disconnect The Modem From The Computer Screen

    Wireless-G Router for 3G/UMTS Broadband 5. Make sure the Router is powered off. 6. Disconnect the Ethernet network cable from your computer. (This is the cable that connects the computer to your modem.) Then click the Next button. Figure 6-4: Disconnect the Modem from the Computer Screen 7.

  • Page 41: Figure 6-6: Connect The Router To A Computer Screen

    Wireless-G Router for 3G/UMTS Broadband 8. Connect the included Ethernet network cable to the Ethernet network port of your computer. (This cable is color-coded yellow to match the yellow Ethernet ports on the Router.) Click the Next button. Figure 6-6: Connect the Router to a Computer Screen 9.

  • Page 42: Figure 6-8: Power On The Router Screen

    Wireless-G Router for 3G/UMTS Broadband 10. Connect the power adapter to the Router’s Power port. Plug the other end into an electrical outlet. Click the Next button. Figure 6-8: Power on the Router Screen 11. Make sure the Power, Internet, and at least one of the numbered LEDs on the Router light up. If they do not light up, make sure the cables are securely connected.

  • Page 43: Figure 6-10: Configure Cable Or Dhcp Settings Screen

    Wireless-G Router for 3G/UMTS Broadband 12. Select the Internet connection type you use: Cable (DHCP), DSL (PPPoE), or Static IP. Proceed to the appropriate section for your Internet connection type. NOTE: If the Internet connection type you use is not listed here, keep the default, Cable (DHCP) for now, and click the Next button.

  • Page 44: Figure 6-12: Enter Static Ip Address Settings Screen

    Wireless-G Router for 3G/UMTS Broadband Static IP IP Address - Enter the IP address provided by your ISP. Subnet Mask- Enter the Subnet Mask provided by your ISP. Gateway - Enter the Gateway IP address provided by your ISP. DNS 1-2 - Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. You need to enter at least one DNS address.

  • Page 45: Figure 6-14: Set The Router's Password Screen

    15. The Setup Wizard will ask you to enter the settings for your wireless network. Wireless Network Name - In the Wireless Network Name field, enter the name of your wireless network, also called the SSID. The name must be identical for all devices in the network. The default setting is linksys (all lowercase).

  • Page 46: Figure 6-16: Configure Wireless Security Settings Screen

    Disabled and use the Router’s Web-based Utility to configure your wireless security radius (remote authentication dial-in user service): a protocol settings. Click the Next button. You will see a warning message. Linksys strongly recommends that you that uses an authentication server to control network access.

  • Page 47: Figure 6-18: Configure Wireless Security Settings - Wpa-Personal Screen

    Passphrase - Enter a passphrase, and then click the Generate button, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless Figure 6-18: Configure Wireless Security Settings - products only.

  • Page 48: Figure 6-20: Confirm New Settings Screen

    Wireless-G Router for 3G/UMTS Broadband 17. The Setup Wizard will ask you to review your settings before it saves them. Click the Yes button if you are satisfied with your settings, or click the No button if you do not want to save your new settings. Figure 6-20: Confirm New Settings Screen 18.

  • Page 49: Chapter 7: Setting Up The Wireless-G Router For Broadband Wan And 3G/Umts Or Gprs Service

    Wireless-G Router for 3G/UMTS Broadband Chapter 7: Setting up the Wireless-G Router for Broadband WAN and 3G/UMTS or GPRS Service Overview This chapter covers the steps for configuring the Router for broadband WAN and 3G/UMTS or GPRS service. If you want to configure the Router for 3G/UMTS or GPRS service only, go to “Chapter 5: Setting up the Wireless-G Router for 3G/UMTS or GPRS Service.”...

  • Page 50: Using The Setup Wizard

    Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\WRT54G3G.exe (if “D” is the letter of your CD-ROM drive). 2. The Setup Wizard will automatically detect the language setting of your PC. On the initial Welcome screen, click the Next button if you want to proceed with the Setup Wizard using the current language.

  • Page 51: Figure 7-3: Select Service Screen

    Wireless-G Router for 3G/UMTS Broadband 4. Click the Broadband WAN and 3G/UMTS or GPRS radio button to configure the Router for both broadband WAN and 3G/UMTS or GPRS service. NOTE: If you click the 3G/UMTS or GPRS radio button to configure the Router for 3G/UMTS or GPRS service only, go to “Chapter 5: Setting up the Wireless-G Router for 3G/UMTS or GPRS Service.”If you click the Broadband WAN Only radio button to configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for Broadband...

  • Page 52: Figure 7-5: Disconnect The Modem From The Computer Screen

    Wireless-G Router for 3G/UMTS Broadband 7. Disconnect the Ethernet network cable from your computer. (This is the cable that connects the computer to your modem.) Then click the Next button. Figure 7-5: Disconnect the Modem from the Computer Screen 8. Connect the cable from the modem to the Internet port on the Router. (This is the same cable that you just disconnected from your computer.) Click the Next button.

  • Page 53: Figure 7-7: Connect The Router To A Computer Screen

    Wireless-G Router for 3G/UMTS Broadband 9. Connect the included Ethernet network cable to the Ethernet network port of your computer. (This cable is color-coded yellow to match the yellow Ethernet ports on the Router.) Click the Next button. Figure 7-7: Connect the Router to a Computer Screen 10.

  • Page 54: Figure 7-9: Power On The Router Screen

    Wireless-G Router for 3G/UMTS Broadband 11. Connect the power adapter to the Router’s Power port. Plug the other end into an electrical outlet. Click the Next button. Figure 7-9: Power on the Router Screen 12. Make sure the Power, Internet, and at least one of the numbered LEDs on the Router light up. If they do not light up, make sure the cables are securely connected.

  • Page 55: Figure 7-11: Insert Vodafone Mobile Connect Card Screen

    Wireless-G Router for 3G/UMTS Broadband 13. If you do NOT see the Insert Vodafone Mobile Connect Card screen, proceed to step 15. If the Vodafone Mobile Connect 3G/UMTS Card is not inserted or recognized, you will be prompted to insert your Vodafone Mobile Connect 3G/UMTS Card.

  • Page 56: Figure 7-14: Configure Vodafone 3G/Umts Or Gprs Services Screen

    Wireless-G Router for 3G/UMTS Broadband 16. Based on the settings of the SIM card, the following information will be displayed: Home Network, Service, 3G/UMTS/GPRS Connection, APN, Username (depending on the country), Password (depending on the country), and Pin Code (depending on the SIM card). Service - Select the appropriate services from the Service options: 3G/UMTS Preferred (Recommended), 3G/UMTS Only, or GPRS Only.

  • Page 57: Figure 7-16: Configure Cable Or Dhcp Settings Screen

    Wireless-G Router for 3G/UMTS Broadband 18. Select the Internet connection type you use: Cable (DHCP), DSL (PPPoE), or Static IP. Proceed to the appropriate section for your Internet connection type. NOTE: If the Internet connection type you use is not listed here, keep the default, Cable (DHCP) for now, and click the Next button.

  • Page 58: Figure 7-18: Enter Static Ip Address Settings Screen

    Wireless-G Router for 3G/UMTS Broadband Static IP IP Address - Enter the IP address provided by your ISP. Subnet Mask- Enter the Subnet Mask provided by your ISP. Gateway - Enter the Gateway IP address provided by your ISP. DNS 1-2 - Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. You need to enter at least one DNS address.

  • Page 59: Figure 7-20: Set The Router's Password Screen

    21. The Setup Wizard will ask you to enter the settings for your wireless network. Wireless Network Name - In the Wireless Network Name field, enter the name of your wireless network, also called the SSID. The name must be identical for all devices in the network. The default setting is linksys (all lowercase).

  • Page 60: Figure 7-22: Configure Wireless Security Settings Screen

    Disabled and use the Router’s Web-based Utility to configure your wireless security radius (remote authentication dial-in user service): a protocol settings. Click the Next button. You will see a warning message. Linksys strongly recommends that you that uses an authentication server to control network access.

  • Page 61: Figure 7-24: Configure Wireless Security Settings - Wpa-Personal Screen

    Passphrase - Enter a passphrase, and then click the Generate button, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless Figure 7-24: Configure Wireless Security Settings - products only.

  • Page 62: Figure 7-26: Confirm New Settings Screen

    Wireless-G Router for 3G/UMTS Broadband 23. The Setup Wizard will ask you to review your settings before it saves them. Click the Yes button if you are satisfied with your settings, or click the No button if you do not want to save your new settings. Figure 7-26: Confirm New Settings Screen 24.

  • Page 63: Chapter 8: Configuring The Wireless-G Router For 3G/Umts Broadband

    Web-based Utility. Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the Router. For advanced users, you may configure the Router’s advanced settings through the Web-based Utility.

  • Page 64: The Setup Tab - Basic Setup

    Wireless-G Router for 3G/UMTS Broadband The Setup Tab - Basic Setup The first screen that appears displays the Setup tab. This allows you to change the Router's general settings. Change these settings as described here, and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes.

  • Page 65: Figure 8-4: Static Ip Connection Type

    Wireless-G Router for 3G/UMTS Broadband • Static IP. If you are required to use a permanent IP address to connect to the Internet, select Static IP. Internet IP Address. This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

  • Page 66: Figure 8-7: Telstra Connection Type

    Wireless-G Router for 3G/UMTS Broadband Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again.

  • Page 67: Figure 8-9: Optional Settings

    Wireless-G Router for 3G/UMTS Broadband soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet connection terminates.

  • Page 68: Figure 8-11: Network Address Server Settings

    Wireless-G Router for 3G/UMTS Broadband DHCP Server. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you don’t want a DHCP server, then click the Disable radio button (no other DHCP features will be available). Starting IP Address.

  • Page 69: The Setup Tab - 3G/Umts Network

    APN Name. The APN (Access Point Name) Name is automatically entered by the Router. Do not change this setting unless told to do so by either Vodafone or LInksys technical support, or the IT manager of your company. If Figure 8-13: Setup Tab - 3G/UMTS you have access to a private APN, you can enter its name here.
  • Page 70 Wireless-G Router for 3G/UMTS Broadband Network Name. Displayed here is the name of the 3G/UMTS or GPRS network the Router is using. To select a different network, click the Select Network button and follow the on-screen instructions. Signal Strength. This indicates the strength of the 3G/UMTS or GPRS signal that the Router is receiving. Connection Time.

  • Page 71: The Setup Tab - Ddns

    Wireless-G Router for 3G/UMTS Broadband The Setup Tab - DDNS The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Router.

  • Page 72: The Setup Tab - Mac Address Clone

    Wireless-G Router for 3G/UMTS Broadband The Setup Tab - MAC Address Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature.

  • Page 73: The Setup Tab - Advanced Routing

    Wireless-G Router for 3G/UMTS Broadband The Setup Tab - Advanced Routing This tab is used to set up the Router’s advanced functions. Operating Mode allows you to select the type(s) of advanced functions you use. Dynamic Routing will automatically adjust how packets travel on your network. Static Routing sets up a fixed route to another network destination.

  • Page 74: The Wireless Tab - Basic Wireless Settings

    (use any of the characters on the keyboard). Make sure this setting is the same for all devices in your wireless network. For added security, you should change the default SSID (linksys) to a unique name. Wireless Channel. Select the appropriate channel from the list provided to correspond with your network settings.

  • Page 75: The Wireless Tab - Wireless Security

    Remote Authentication Dial-In User Service.) These four are briefly discussed here. For detailed instructions on configuring wireless security for the Router, turn to “Appendix B: Wireless Security.” IMPORTANT: Linksys strongly recommends that you enable wireless security on your wireless network. Otherwise, unauthorised users may be able to access the Internet using your service and incur additional charges.

  • Page 76: Figure 8-23: Wireless Tab - Wireless Security (Wpa Enterprise - Tkip)

    Wireless-G Router for 3G/UMTS Broadband WPA Enterprise. This option features WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) First, select the type of WPA algorithm you want to use, TKIP or AES.

  • Page 77: Figure 8-26: Wireless Tab - Wireless Security (Radius)

    Wireless-G Router for 3G/UMTS Broadband RADIUS. This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) First, enter the RADIUS server’s IP Address and port number, along with a key shared between the Router and the server.

  • Page 78: The Wireless Tab - Wireless Mac Filter

    Wireless-G Router for 3G/UMTS Broadband The Wireless Tab - Wireless MAC Filter Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius. Wireless MAC Filter Wireless MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable. If you do not wish to filter users by MAC Address, select Disable.

  • Page 79: The Wireless Tab - Advanced Wireless Settings

    Wireless-G Router for 3G/UMTS Broadband The Wireless Tab - Advanced Wireless Settings This tab is used to set up the Router’s advanced wireless functions. These settings should only be adjusted by an expert administrator as incorrect settings can reduce wireless performance. Advanced Wireless Authentication Type.
  • Page 80 Wireless-G Router for 3G/UMTS Broadband sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Fragmentation Threshold. This value specifies the maximum size for a packet before data is fragmented into multiple packets.

  • Page 81: The Security Tab - Firewall

    Wireless-G Router for 3G/UMTS Broadband The Security Tab - Firewall Firewall Firewall Protection. Enable this feature to employ Stateful Packet Inspection (SPI) for more detailed review of data packets entering your network environment. Block WAN Requests Block Anonymous Internet Requests. Use this feature to prevent your network from being “pinged,” or detected, by other Internet users.

  • Page 82: The Security Tab - Vpn Passthrough

    Wireless-G Router for 3G/UMTS Broadband The Security Tab - VPN Passthrough Use this screen to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Router’s firewall. VPN Passthrough IPSec Passthrough. Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer.

  • Page 83: Figure 8-34: Internet Policy Summary

    Wireless-G Router for 3G/UMTS Broadband 2. To enable this policy, click the radio button beside Enable. 3. Enter a Policy Name in the field provided. 4. Click the Edit List of PCs button to select which PCs will be affected by the policy. The List of PCs screen will appear.

  • Page 84: The Applications And Gaming Tab - Port Range Forward

    Wireless-G Router for 3G/UMTS Broadband The Applications and Gaming Tab - Port Range Forward The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming.

  • Page 85: The Applications & Gaming Tab - Port Triggering

    Wireless-G Router for 3G/UMTS Broadband The Applications & Gaming Tab - Port Triggering The Port Triggering screen allows the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the requested data returns through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules.

  • Page 86: The Applications And Gaming Tab - Dmz

    Wireless-G Router for 3G/UMTS Broadband The Applications and Gaming Tab - DMZ The DMZ feature allows one network user to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The Port Range Forward feature is more secure because it only opens the ports you want to have opened, while DMZ hosting opens all the ports of one computer, exposing the computer to the Internet.
  • Page 87 Wireless-G Router for 3G/UMTS Broadband Ethernet Port Priority Port 1-4, Priority, and Flow Control. Ethernet Port Priority QoS allows you to prioritize performance for four of the Router’s ports, Ethernet (LAN) Ports 1-4. For each of these ports, select High or Low for Priority. For Flow Control, if you want the Router to control the transmission of data between network devices, select Enable.

  • Page 88: The Administration Tab - Management

    Wireless-G Router for 3G/UMTS Broadband The Administration Tab - Management This section of the Administration tab allows the network’s administrator to manage specific Router functions for access and security. Router Password Local Router Access Router Password and Re-enter to confirm. You can change the Router’s password from here. Enter a new Router password and then type it again in the Re-enter to confirm field to confirm.

  • Page 89: The Administration Tab - Log

    Wireless-G Router for 3G/UMTS Broadband The Administration Tab - Log The Router can keep logs of all traffic for your Internet connection. Log. To disable the Log function, keep the default setting, Disable. To monitor traffic between the network and the Internet, select Enable.

  • Page 90: The Administration Tab - Diagnostics

    Wireless-G Router for 3G/UMTS Broadband The Administration Tab - Diagnostics The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. Ping Test Ping Parameters. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test screen.

  • Page 91: The Administration Tab - Factory Defaults

    The Administration Tab - Firmware Upgrade Upgrade Firmware To upgrade the Router’s firmware, first download the firmware from the Linksys website. Then extract the file on your computer. Do not upgrade your firmware unless you are experiencing problems with the Router.

  • Page 92: The Status Tab - 3G/Umts

    Wireless-G Router for 3G/UMTS Broadband The Status Tab - 3G/UMTS The 3G/UMTS screen on the Status Tab displays the Router’s current mobile network and 3G/UMTS card status. Mobile Network Status Mobile Network Bearer. Displayed here is the name of the mobile network bearer the Router is using. Network Name.

  • Page 93: The Status Tab - Router

    Wireless-G Router for 3G/UMTS Broadband The Status Tab - Router The Router screen on the Status Tab displays the Router’s current status. Router Information Firmware Version. This is the Router’s current firmware. Current Time. This shows the time, as you set on the Setup Tab. MAC Address.

  • Page 94: The Status Tab - Local Network

    Wireless-G Router for 3G/UMTS Broadband The Status Tab - Local Network The Local Network screen on the Status Tab displays the status of your network. Local Network MAC Address. This is the Router’s MAC Address, as seen on your local, Ethernet network. IP Address.

  • Page 95: Figure 8-52: Status Tab - Wireless

    Wireless-G Router for 3G/UMTS Broadband The Status Tab - Wireless The Wireless screen on the Status Tab displays the status of your wireless network. Wireless MAC Address. This is the Router’s MAC Address, as seen on your local, wireless network. Mode.

  • Page 96: Appendix A: Troubleshooting

    Provided are possible solutions to problems that may occur during the installation and operation of the Router. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com/international.
  • Page 97 Wireless-G Router for 3G/UMTS Broadband • For Windows 2000: 1. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. 2. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. 3.
  • Page 98 Wireless-G Router for 3G/UMTS Broadband B Open a command prompt. For Windows 98SE and Me: • Click Start and Run. In the Open field, type command. Press the Enter key or click the OK button. For Windows 2000 and XP: •...
  • Page 99 Wireless-G Router for 3G/UMTS Broadband 5. I am not able to access the Setup page of the Router’s web-based utility. • Refer to “Problem #3, I want to test my Internet connection” to verify that your computer is properly connected to the Router. •...
  • Page 100 Wireless-G Router for 3G/UMTS Broadband 7. I need to set up online game hosting or use other Internet applications. If you want to play online games or use Internet applications, most will work without doing any port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application.
  • Page 101 Wireless-G Router for 3G/UMTS Broadband Follow these steps to set DMZ hosting: 1. Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications & Gaming => Port Range Forward tab. 2.
  • Page 102 Router to the factory default settings. In other words, the Router will revert to its original factory configuration. 12. I need to upgrade the firmware. In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com/international. Follow these steps: 1.
  • Page 103 Wireless-G Router for 3G/UMTS Broadband 15. I can’t access my e-mail, web or I am getting corrupted data from the Internet. The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492.

  • Page 104: Frequently Asked Questions

    Does the Router support any operating system other than Windows 98SE, Windows Millennium, Windows 2000, or Windows XP? Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of any non-Windows operating systems. Does the Router support ICQ send file? Yes, with the following fix: click ICQ menu ->...
  • Page 105 How will I be notified of new Router firmware upgrades? All Linksys firmware upgrades are posted on the Linksys website at www.linksys.com/international, where they can be downloaded for free. To upgrade the Router’s firmware, use the Administration - Firmware Upgrade tab of the Router’s web-based utility.
  • Page 106 Wireless-G Router for 3G/UMTS Broadband newer firmware version, unless that version contains new features that you would like to use. Downloading a more current version of Router firmware will not enhance the quality or speed of your Internet connection, and may disrupt your current connection stability.
  • Page 107 Wireless-G Router for 3G/UMTS Broadband How do I get mIRC to work with the Router? Under the Port Forwarding tab, set port forwarding to 113 for the PC on which you are using mIRC. Can the Router act as my DHCP server? Yes.
  • Page 108 Wireless-G Router for 3G/UMTS Broadband What is ad-hoc mode? When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to communicate directly with each other. The ad-hoc wireless network will not communicate with any wired network. What is infrastructure mode? When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with a wired network through a wireless access point.
  • Page 109 Wireless-G Router for 3G/UMTS Broadband transmission, but the trade-off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to the right frequency, a spread-spectrum signal looks like background noise.
  • Page 110 Wireless-G Router for 3G/UMTS Broadband How many channels/frequencies are available with the Router? There are eleven available channels, ranging from 1 to 11, in North America. There are thirteen available channels, ranging from 1 to 13, in most of Europe. There may be additional channels available in other regions, subject to the regulations of your region and/or country.
  • Page 111 Wireless-G Router for 3G/UMTS Broadband 3G/UMTS The 3G/UMTS LED flashes as the Router connects to the mobile network. It is solidly lit when the connection is established. The LED lights up blue if the Router connects to a 3G/UMTS network. The LED lights up green if the Router connects to a GPRS network. If the LED quickly flashes, alternating between blue and green, and the Router does not have a connection to the mobile network, then either the Router’s PIN code is incorrect, or there is no Vodafone Mobile Connect 3G/UMTS data or SIM card inserted when you push the 3G/UMTS...
  • Page 112 For technical support regarding the card, contact your reseller. If you have questions about your bill, contact Vodafone. (For Vodafone contact information, refer to “Appendix J: Contact Information”.) If your questions about the Router are not addressed here, refer to the Linksys website, www.linksys.com/international.

  • Page 113: Appendix B: Wireless Security

    Wireless-G Router for 3G/UMTS Broadband Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation.
  • Page 114 This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.) Hackers know these defaults and can check these against your network. Change your SSID to something unique and not something related to your company or the networking products you use.
  • Page 115 These security recommendations should help keep your mind at ease while you are enjoying the most flexible and convenient technology Linksys has to offer. Appendix B: Wireless Security Security Threats Facing Wireless Networks...

  • Page 116: Appendix C: Upgrading Firmware

    Appendix C: Upgrading Firmware The Router's firmware is upgraded through the Web-based Utility's Administration tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com/international. 2. Extract the firmware file on your computer. 3. Open the Router’s Web-based Utility, and click the Administration tab.

  • Page 117: Appendix D: Windows Help

    Wireless-G Router for 3G/UMTS Broadband Appendix D: Windows Help Almost Linksys wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix.

  • Page 118: Appendix E: Finding The Mac Address And Ip Address For Your Ethernet Adapter

    Wireless-G Router for 3G/UMTS Broadband Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s Ethernet adapter.

  • Page 119: For The Router's Web-Based Utility

    Wireless-G Router for 3G/UMTS Broadband 3. Write down the Physical Address as shown on your computer screen (Figure E-3); it is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters. The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering. NOTE: The MAC address is also called the Physical Address.

  • Page 120: Appendix F: Glossary

    Wireless-G Router for 3G/UMTS Broadband Appendix F: Glossary 802.11b - A wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz. 802.11g - A wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an operating frequency of 2.4GHz, and backward compatibility with 802.11b devices.
  • Page 121 Wireless-G Router for 3G/UMTS Broadband Cable Modem - A device that connects a computer to the cable television network, which in turn connects to the Internet. CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) - A method of data transfer that is used to prevent data collisions.
  • Page 122 Wireless-G Router for 3G/UMTS Broadband EAP (Extensible Authentication Protocol) - A general authentication protocol used to control network access. Many specific authentication methods work within this framework. EAP-PEAP (Extensible Authentication Protocol-Protected Extensible Authentication Protocol) - A mutual authentication method that uses a combination of digital certificates and another system, such as passwords. EAP-TLS (Extensible Authentication Protocol-Transport Layer Security) - A mutual authentication method that uses digital certificates.
  • Page 123 Packet - A unit of data sent over a network. Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products. PEAP (Protected Extensible Authentication Protocol) - A mutual authentication method that uses a combination of digital certificates and another system, such as passwords.
  • Page 124 Wireless-G Router for 3G/UMTS Broadband Ping (Packet INternet Groper) - An Internet utility used to determine whether a particular IP address is online. POP3 (Post Office Protocol 3) - A standard mail server commonly used on the Internet. Port - The connection point on a computer or networking device used for plugging in cables or adapters. Power over Ethernet (PoE) - A technology enabling an Ethernet network cable to deliver both data and power.
  • Page 125 Wireless-G Router for 3G/UMTS Broadband Spread Spectrum - Wideband radio frequency technique used for more reliable and secure data transmission. SSID (Service Set IDentifier) - Your wireless network's name. Static IP Address - A fixed address assigned to a computer or device that is connected to a network. Static Routing - Forwarding data in a network via a fixed path.
  • Page 126 Wireless-G Router for 3G/UMTS Broadband VPN (Virtual Private Network) - A security measure to protect data as it leaves one network and goes to another over the Internet. WAN (Wide Area Network)- The Internet. WEP (Wired Equivalent Privacy) - A method of encrypting network data transmitted on a wireless network for greater security.

  • Page 127: Appendix G: Specifications

    Wireless-G Router for 3G/UMTS Broadband Appendix G: Specifications Model WRT54G3G Standards IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE 802.11b Channels 11 Channels (US, Canada) 13 Channels (Europe) 14 Channels (Japan) Ports/Buttons Internet: One 10/100 RJ-45 Port or PC Card Slot for any Vodafone Mobile Connect 3G/UMTS Data Card...
  • Page 128 Wireless-G Router for 3G/UMTS Broadband Unit Weight 0,35 kg (12,35 oz.) Power External 12 V DC, 1,0 A Certifications FCC, IC-03, CE, Wi-Fi (802.11b, 802.11g), WPA Operating Temp. 0° C to 40° C (32° F to 104° F) Storage Temp. -20°...

  • Page 129: Appendix H: Warranty Information

    Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.

  • Page 130: Appendix I: Regulatory Information

    Wireless-G Router for 3G/UMTS Broadband Appendix I: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 131 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:...
  • Page 132 Wireless-G Router for 3G/UMTS Broadband Deutsch/German Umweltinformation für Kunden innerhalb der Europäischen Union Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte.
  • Page 133 Wireless-G Router for 3G/UMTS Broadband Ξλληνικά/Greek Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Η Κοινοτική Οδηγία 2002/96/EC απαιτεί ότι ο εξοπλισµός ο οποίος φέρει αυτό το σύµβολο στο προϊόν και/ή στη συσκευασία του δεν πρέπει να απορρίπτεται µαζί µε τα µικτά κοινοτικά απορρίµµατα.
  • Page 134 Wireless-G Router for 3G/UMTS Broadband Latviešu valoda/Latvian Ekoloģiska informācija klientiem Eiropas Savienības jurisdikcijā Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst izmest nešķirotā veidā kopā ar komunālajiem atkritumiem (tiem, ko rada vietēji iedzīvotāji un uzņēmumi).
  • Page 135 Wireless-G Router for 3G/UMTS Broadband Magyar/Hungarian Környezetvédelmi információ az európai uniós vásárlók számára A 2002/96/EC számú európai uniós irányelv megkívánja, hogy azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott termék kidobásakor a szokványos háztartási hulladékelszállítási rendszerektõl elkülönített eljárást kell alkalmazni.
  • Page 136 Wireless-G Router for 3G/UMTS Broadband Polski/Polish Informacja dla klientów w Unii Europejskiej o przepisach dotyczących ochrony środowiska Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt oznaczony symbolem znajdującym się na produkcie i/lub jego opakowaniu nie był wyrzucany razem z innymi niesortowanymi odpadami komunalnymi.
  • Page 137 Korrekt kassering och återvinning skyddar mot eventuella negativa konsekvenser för miljön och personhälsa. För mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken där du köpte produkten. For more information, visit www.linksys.com. Appendix I: Regulatory Information...
  • Page 138 Wireless-G Router for 3G/UMTS Broadband Compliance Information for 2.4-GHz Wireless Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive) Appendix I: Regulatory Information...
  • Page 139 • A pdf file is included on the product's CD. • A print copy is included with the product. • A pdf file is available on the product's webpage. Visit www.linksys.com/international and select your country or region. Then select your product.
  • Page 140 Wireless-G Router for 3G/UMTS Broadband CE Marking For the Linksys Wireless-B and Wireless-G products, the following CE mark, notified body number (where applicable), and class 2 identifier are added to the equipment. Check the CE label on the product to find out which notified body was involved during the assessment.
  • Page 141 (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable.
  • Page 142 NOTE: The power output setting may not be available on all wireless products. For more information, refer to the documentation on your product’s CD or http://www.linksys.com/international. Wireless Adapters Wireless adapters have the power output set to 100% by default. Maximum power output on each adapter does not exceed 20 dBm (100 mW);...
  • Page 143 7. Click the type of documentation you want. The document will automatically open in PDF format. NOTE: If you have questions regarding the compliance of these products or you cannot find the information you need, please contact your local sales office or visit http://www.linksys.com/international for more details. Appendix I: Regulatory Information...

  • Page 144: Appendix J: Contact Information

    082155 Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria support.at@linksys.com...
  • Page 145 Sweden support.se@linksys.com Switzerland support.ch@linksys.com United Kingdom & Ireland support.uk@linksys.com Outside of Europe E-mail Address Asia Pacific asiasupport@linksys.com (English only) Latin America support.portuguese@linksys.com or support.spanish@linksys.com Middle East & Africa support.mea@linksys.com (English only) U.S. and Canada support@linksys.com Appendix J: Contact Information...

Table of Contents